| Router Identification | |
|
Router Identifier (required)
|
Uniquely identifies the router
|
Type the Services Router's 32-bit IP address, in dotted decimal
notation.
|
| BGP | |
|
Enable BGP
|
Enables or disables BGP.
|
- To enable BGP, select the check box.
- To disable BGP, clear the check box.
|
|
Autonomous System Number
|
Sets the unique numeric identifier of the AS in which the Services Router is
configured.
|
Type the Services Router's 32-bit AS number, in dotted decimal notation.
If you enter an integer, the value is converted to a 32-bit equivalent.
For example, if you enter 3, the value assigned to the AS is 0.0.0.3.
|
|
Peer Autonomous System Number
|
Sets the unique numeric identifier of the AS in which the peer host
resides.
|
Type the peer host's 32-bit AS number, in dotted decimal notation.
If you enter an integer, the value is converted to a 32-bit equivalent.
For example, if you enter 3, the value assigned to the AS is 0.0.0.3.
|
|
Peer Address
|
Specifies the IP address of the peer host's interface to which the BGP
session is being established.
|
Type the IP address of the peer host's adjacent interface, in dotted
decimal notation.
|
|
Local Address
|
Specifies the IP address of the local host's interface from which the
BGP session is being established.
|
Type the IP address of the local host's adjacent interface, in dotted
decimal notation.
|
