Verifying the Presence of RSVP-Signaled LSPs

Purpose

Verify that the inet.3 routing table of the entry (ingress) Services Router, R1, has a configured LSP to the loopback address of Router R7.

Action

From the CLI, enter the show route table inet.3 command.

inet.3: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both

10.0.9.7/32         *[RSVP/7] 00:05:29, metric 10
                    > to 10.0.4.17 via ge-0/0/0.0, label-switched-path r1–r7

What it Means

The output shows the RSVP routes that exist in the inet.3 routing table. Verify that an RSVP-signaled LSP is associated with the loopback address of the exit (egress) router, R7, in the MPLS network.

Related Topics

For a complete description of show route table output, see the JUNOS Routing Protocols and Policies Command Reference.