Verifying the PIM RP Configuration

Purpose

Verify that the PIM RP is statically configured with the correct IP address.

Action

From the CLI, enter the show pim rpscommand.

Instance: PIM.master
Address family INET
RP address      Type      Holdtime Timeout Active groups Group prefixes
192.168.14.27   static           0    None             2 224.0.0.0/4

What it Means

The output shows a list of the RP addresses that are configured for PIM. At least one RP must be configured. Verify the following information:

• The configured RP is listed with the proper IP address.
• Under Type, the word static appears.

Related Topics

For a complete description of show pim rps output, see the JUNOS Routing Protocols and Policies Command Reference.