[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Monitoring DLSw Routing Information

To view DLSw routing information, select Monitor>Routing>DLSw Information, or enter the following CLI commands:

Table 56 summarizes key routing information output fields in the DLSw routing display.

Table 56: Summary of Key DLSw Routing Information Output Fields

Field

Values

Additional Information

DLSw Capabilities

Peer

IP address of the peer DLSw router

 

Vendor ID

Numerical value assigned to Juniper Networks.

 

Version number

DLSw protocol version.

 

Initial pacing window

Frequency at which packets are sent.

 

Version string

Juniper Networks software version information.

 
DLSw Circuits  

Circuit id

DLSw circuit ID

 

Local Address

MAC address of the local DLSw peer.

 

LSAP

Number of the local service access point.

 

Remote address

MAC address of the remote DLSw peer,

 

DSAP

Number of the destination service access point.

 

State (or circuit state)

Connectivity status; disconnected or connected.

 

Peer (or remote peer address)

IP address of the remote DLSw peer.

 
DLSw Peers  

Peer

IP address of the remote DLSw peer.

 

State

Status of the connection.

 

Circuits

Number of circuits on the DLSw network.

 

Local address

IP address of the local DLSw peer.

 

Created time

Time of circuit creation.

 

Connected time

Length of time that the connection is active.

 

Receive initial pacing

Size of the inital pacing frame.

 

No circuits timeout

Length of time before a circuit becomes inactive.

 
DLSw Reachability  

MAC index

Number assigned to the remote DLSw peer.

 

MAC address

MAC address of the remote DLSw peer.

 

Remote DLSw address

IP address of the remote DLSw peer.

 

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]