[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Displaying DLSw Circuit State

Purpose

Display DLSw circuits currently established after configuration in Configuring Basic DLSw (Required).

Action

From the CLI, enter the show dlsw circuits command.

user@host> show dlsw circuits

Local address       LSAP Remote address    DSAP Peer            Uptime
22:22:00:00:00:06 04      44:44:00:00:00:06  04      18.255.18.2   00:06:42

What it Means

The output shows a summary of DLSw circuits. Verify that the information is correct for your DLSw network.

Local address—MAC address of the local DLSw peer
LSAP—Number of the local service access point
Remote address—MAC address of the remote DLSw peer
DSAP—Number of the destination service access point
Peer (or remote peer address)—IP address of the remote DLSw peer
Uptime—How long the circuit has been established

See Also

For a complete description of show dlsw circuits output, see the JUNOS System Basics and Services Command Reference.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]