Displaying Details of DLSw Peers

Purpose

Display detailed information about DLSw peers on a network.

Action

From the CLI, enter the show dlsw peers detail command.

Peer: 18.255.18.2
   State: Connected, Circuits: 1, Local address: 10.255.4.50
   Uptime: 00:15:05
   Receive initial pacing: 20, No circuits timeout: 0
   Type-of-service value: 0
   Peer cost: 100, Load balancing: Circuit Weight
   Circuit weight: 2
   Statistics:
        Data packets received    : 0
        Data packets sent        : 0
        Data bytes received      : 0
        Data bytes sent          : 0
        Control packets received : 7
        Control packets sent     : 8
        CANUREACH_ex received    : 0
        CANUREACH_ex sent        : 1
        ICANREACH_ex received    : 1
        ICANREACH_ex sent        : 0

What it Means

The output displays the DLSw peer state and the following statistics:

• Packets received—Number of packets received from DLSw peers
• Packets sent—Number of packets sent to the DLSw peers
• Bytes received—Number of bytes received from DLSw peers
• Bytes sent—Number of bytes sent to the DLSw peers
• CANUREACH_ex received—Number of exploratory messages received from remote DLSw peers
• CANUREACH_ex sent—Number of exploratory messages sent to remote DLSw peers
• ICANREACH_ex received—Number of confirmation messages received from remote DLSw peers
• ICANREACH_ex sent—Number of confirmation messages sent to remote DLSw peers

See Also