Before You Begin

Before you begin initial configuration, complete the following tasks:

• Install the Services Router in its permanent location, as described in Installing and Connecting a Services Router.
• Gather the following information:
  • Hostname for the router on the network
  • Domain that the router belongs to on the network
  • Password for the root user
  • Time zone where the router is located
  • IP address of an NTP server (if NTP is used to set the time on the router)
  • IP address of a DNS server
  • List of domains that can be appended to hostnames for DNS resolution
  • IP address of the default gateway
  • IP address to be used for the loopback interface
  • IP address of the built-in Ethernet interface that you will use for management purposes. The examples in this guide use the ge-0/0/0 interface.
• If you are performing the initial configuration with the J-Web interface, collect the following equipment:
  • A management device, such as a laptop, with an Ethernet port
  • An Ethernet cable
• If you are performing the initial configuration with the CLI, collect the following equipment:
  • A management device, such as a PC or laptop, with a serial port and an asynchronous terminal application (such as Microsoft Windows Hyperterminal)
  • An RJ-45 to DB-9 serial port adapter (provided)
  • A Ethernet cable (provided)
  • For a remote connection, two dial-up modems
  • For a remote modem connection, a DB-9 female to DB-25 male adapter, or other adapter appropriate for your modem (not provided)