[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Avaya VoIP Module Summary

Table 28 provides the module names, software release information, slot and port numbers, maximum number allowed on a chassis, and sample interface names (where applicable) for the Avaya VoIP modules.

On each J-series Services Router with Avaya VoIP, a single TGM550 Telephony Gateway Module (TGM) and at least one telephony interface module (TIM) is required. No more than four TIMs of any kind can be installed on a single chassis.

Table 28: Avaya VoIP Module Summary

PIM	Also Called	Software Release for This PIM in J4350 or J6350	Slot and Port Numbering	Maximum Number on a Chassis	Sample Interface Name (type-pim/0/port)
TGM550 Telephony Gateway Module	TGM550 Gateway Module TGM550	JUNOS 8.2	Slots—1 through 6	One (required) If more than one TGM550 is installed, only the one in the lowest-numbered slot is enabled. For example, if TGM550s are installed in slots 2 and 3, only the one in slot 2 is enabled.	vp-3/0/0 (See the interface naming conventions in the J-series Services Router Basic LAN and WAN Access Configuration Guide.)
TIM510 E1/T1 Telephony Interface Module	TIM510 E1/T1 media module TIM510	JUNOS 8.2	Slots—1 through 6	Two
TIM514 Analog Telephony Interface Module	TIM514 analog media module TIM514	JUNOS 8.2	Slots—1 through 6	Four
TIM521 BRI Telephony Interface Module	TIM521 BRI media module TIM521	JUNOS 8.2	Slots—1 through 6	Two

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]