[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Disabling ISDN Signaling

The JUNOS ISDN signaling process manages ISDN signaling by initializing ISDN connections. You can disable ISDN signaling by disabling the ISDN signaling process.

Caution: Never disable a software processes unless instructed to do so by a Customer Support engineer.

To disable ISDN signaling:

  1. Navigate to the top of the configuration hierarchy in either the J-Web or CLI configuration editor.
  2. Perform the configuration tasks described in Table 73.
  3. If you are finished configuring the router, commit the configuration.

Table 73: Disabling ISDN Signaling

Task

J-Web Configuration Editor

CLI Configuration Editor

Navigate to the Processes level in the configuration hierarchy.

  1. In the J-Web interface, select Configuration>View and Edit>Edit Configuration.
  2. Next to System, click Edit.
  3. Next to Processes, click Configure.
  4. Next to Isdn signaling, click Configure.

From the [edit] hierarchy level, enter

set system processes isdn-signaling disable

Disable ISDN signaling on the Services Router.
  1. Select the Disable check box.
  2. Click OK.
 
[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

[an error occurred while processing this directive]