Configuring a VoIP Interface with EPW and Disk-on-Key

If you have a new J4350 or J6350 Services Router with the TGM550 and TIMs installed in the router, you can use the Avaya Electronic Preinstallation Worksheet (EPW) and a Disk-on-Key USB memory stick to configure VoIP on the router.

The EPW is a customized Microsoft Excel spreadsheet that you use to collect a complete set of VoIP configuration information and create a configuration file named juniper-config.txt. You can copy the juniper-config.txt file to a Disk-on-Key device and boot the router from the device to configure VoIP on the router.

This configuration method has the following requirements:

• A management device (PC or laptop) running Microsoft Excel version 2000 or later.
• A Disk-on-Key device with one of the following 16-bit or 32-bit file allocation table (FAT) file systems:
  • DOS 3.0+ 16-bit FAT (up to 32 MB)
  • DOS 3.31+ 16-bit FAT (over 32 MB)
  • WIN95 OSR2 FAT32
  • WIN95 OSR2 FAT32, LBA-mapped
  • WIN95 DOS 16-bit FAT, LBA-mapped
• A Services Router with the factory configuration and the TGM550 and TIMs installed. If other JUNOS configuration files exist on the Services Router, the router cannot read the juniper-config.txt file from the Disk-on-Key device. To remove the configuration files from the router, press and hold the RESET CONFIG button for 15 seconds or more, until the STATUS LED blinks red.

  Caution: Pressing and holding the RESET CONFIG button for 15 seconds or more—until the STATUS LED blinks red—deletes all configurations on the router, including the backup configurations and rescue configuration, and loads and commits the factory configuration.

To configure a VoIP interface using EPW and Disk-on-Key:

1. Follow these instructions to download the EPW to a PC or laptop computer.
   • Go to http://support.avaya.com.
   • On the Avaya support page, click Find Documentation and Technical Information by Product Name.
   • Scroll down and click Integrated Management — Provisioning & Installation Manager.
   • Select the 4.0 release from the Select a release drop-down box and click View all documents.
   • Scroll down and double click the Electronic Preinstallation Worksheet for Provisioning Installation Manager link.
   • Scroll down and double click the View XLS link.
   • In the File Open window, click the Open button.
   • In the Security Warning window, open the EPW by clicking Enable Macros. Be sure to open the EPW in Microsoft Excel version 2000 or later versions.
2. Enter information in the individual worksheets. Ensure that all mandatory fields (highlighted in blue color) are filled in.
3. Select File>Save.
4. Open the InitialConfig worksheet and click Create Configuration File.

   The Select Location page is displayed.

5. Choose a location where you want to create the configuration file.

   The configuration file with the name juniper-config.txt is created.

6. Copy the juniper-config.txt file to a Disk-on-Key device.
7. Press and release the power button to power off the router. Wait for the POWER LED to turn off.
8. Plug the Disk-on-Key device into the USB port on the Services Router.
9. Power on the router by pressing the POWER button on the front panel. Verify that the POWER LED on the front panel turns green.

   The router reads the juniper-config.txt file from the Disk-on-Key device and commits the configuration.

10. Remove the Disk-on-Key device.