Objectives

This guide contains instructions for configuring Services Routers in virtual private networks (VPNs) and multicast networks, configure data link switching (DLSw) services, and apply routing techniques such as policies, firewall filters, IP Security (IPSec), and class-of-service (CoS) classification for safe, efficient routing.

Note: This guide documents Release 8.3 of the JUNOS software. For additional information about J-series Services Routers—either corrections to or omissions from this guide—see the J-series Services Router Release Notes at https://www.juniper.net.

J-series Services Router operations are controlled by the JUNOS Internet software. You direct the JUNOS software through either a Web browser or a command-line interface (CLI) to perform the tasks shown in Table 1.

J-series Services Router guides provide complete instructions for using the J-Web interface on a J-series router. These guides also provide brief instructions for using the JUNOS CLI. For complete information about using the CLI, see the JUNOS software manuals listed in Related Juniper Networks Documentation.

Table 1: Capabilities of J-series User Interfaces

For information about how to use the J-Web interface, see the J-Web Interface User Guide. For information about how to use the CLI, see the JUNOS CLI User Guide.