|
System
|
Displays Services Router system properties, such as the system identification
and uptime, users, and resource usage.
For details, see Monitoring System Properties.
|
-
show system uptime
-
show system users
-
show system storage
-
show system processes
|
|
Chassis
|
Displays active chassis alarms, environment and hardware information,
and status of Physical Interface Modules (PIMs).
For details, see Monitoring the Chassis.
|
-
show chassis alarms
-
show chassis environment
-
show chassis fpc
-
show chassis hardware
|
|
Interfaces
|
Hierarchically displays all Services Router physical and logical
interfaces, including state and configuration information.
For details, see Monitoring the Interfaces.
|
-
show interfaces terse
-
show interfaces detail
-
show interfaces interface-name
|
|
Routing
|
Displays routing information through the following options:
- Route Information—Information about the routes in a routing
table, including destination, protocol, state, and parameter information.
You can narrow the list of routes displayed by specifying search criteria.
- OSPF Information—Summary of OSPF neighbors, interfaces,
and statistics.
- BGP Information—Summary of BGP routing and neighbor information.
- RIP Information—Summary of RIP neighbors and statistics.
- DLSw Information—Summary of DLSw circuits and peers.
For details, see Monitoring Routing Information.
|
- Route information
-
show route terse
-
show route detail
- OSPF information
-
show ospf neighbors
-
show ospf interfaces
-
show ospf statistics
- BGP information
-
show bgp summary
-
show bgp neighbor
- RIP information
-
show rip statistics
-
show rip neighbors
- DLSw information
-
show dlsw capabilities
-
show dlsw circuits
-
show dlsw peers
-
show dlsw reachability
|
|
Class of Service (CoS)
|
Displays information about the performance of class of service on a
router through the following options:
- Interfaces—Displays the physical and logical interfaces
in the system and provides details about the CoS components assigned to these
interfaces.
- Classifiers—Displays the forwarding classes and loss priorities
that incoming packets are assigned to based on the packet's CoS values.
- CoS Value Aliases—Displays the CoS value aliases that the
system is using to represent Differentiated Services code point (DSCP), DSCP
IPv6, MPLS experimental (EXP), and IPv4 precedence bits.
- RED Drop Profiles—Displays detailed information about the
drop profiles used by the system. Also, displays a graph of the random early
detection (RED) curve that the system uses to determine the queue fullness
and drop probability.
- Forwarding Classes—Displays the assignment of forwarding
classes to queue numbers.
- Rewrite Rules—Displays packet CoS value rewrite rules based
on the forwarding classes and loss priorities.
- Scheduler Maps—Displays the assignment of forwarding classes
to schedulers. Schedulers include transmit rate, rate limit, and buffer size.
For details, see Monitoring Class-of-Service Performance.
|
- Interfaces—show class-of-service interface
- Classifiers—show class-of-service classifier
- CoS value aliases—show class-of-service code-point-aliases
- RED drop profiles—show class-of-service drop-profile
- Forwarding classes—show class-of-service forwarding-class
- Rewrite rules—show class-of-service rewrite-rule
- Scheduler maps—show class-of-service scheduler-map
|
|
MPLS
|
Displays information about MPLS label-switched paths (LSPs) and virtual
private networks (VPNs) through the following options:
- Interfaces—Information about the interfaces on which MPLS
is enabled, including operational state and any administrative groups applied
to an interface.
- LSP Information—Information about LSP sessions currently
active on the Services Router, including inbound (ingress) and outbound (egress)
addresses, LSP state, and LSP name.
- LSP Statistics—Statistics for LSP sessions currently active
on the Services Router, including the total number of packets and bytes forwarded
through an LSP.
- RSVP Sessions—Information about RSVP-signaled LSP sessions
currently active on the Services Router, including inbound (ingress) and outbound
(egress) addresses, LSP state, and LSP name.
- RSVP Interfaces—Information about the interfaces on which
RSVP is enabled, including the interface name, total bandwidth through the
interface, and total current reserved and reservable (available) bandwidth
on the interface.
For details, see Monitoring MPLS Traffic Engineering Information.
|
- Interfaces—show mpls interface
- LSP information—show mpls lsp
- LSP Statistics—show mpls lsp statistics
- RSVP Sessions—show rsvp session
- RSVP Interfaces—show rsvp interface
|
|
Service Sets
|
Displays information about configured service sets.
For details, see Monitoring Service Sets.
|
-
show services service-sets summary
-
show services service-sets memory-usage
|
|
Firewall
|
Displays firewall and intrusion detection service (IDS) information
through the following options:
- Stateful Firewall—Displays the stateful firewall configuration.
- IDS Information—Displays information about the configured
IDS.
For details, see Monitoring Firewalls.
|
- Stateful firewall information
-
show services stateful-firewall conversations
-
show services stateful-firewall flows
- IDS information
-
show services ids destination-table
-
show services ids source-table
-
show services ids pair-table
|
|
IPSec
|
Displays configured IPSec tunnels and statistics, and IKE security associations.
For details, see Monitoring IPSec Tunnels.
|
-
show services ipsec-vpn ipsec statistics
-
show services ipsec-vpn ipsec security-associations
-
show services ipsec-vpn ike security-associations
|
|
NAT
|
Displays configured NAT pools.
For details, see Monitoring NAT Pools.
|
|
|
DHCP
|
Displays DHCP dynamic and static leases, conflicts, pools, and statistics.
For details, see Monitoring DHCP.
|
-
show system services dhcp binding
-
show system services dhcp conflict
-
show system services dhcp pool
-
show system services dhcp statistics
|
|
RPM
|
Displays probe results for all RPM probes configured on the Services Router,
including the round–trip times, jitter, and loss percentage of probes
sent. Additionally, the RPM monitoring page displays a graph that plots the
probe results as a function of time.
For details, see Monitoring RPM Probes.
|
show services rpm probe-results
|
|
PPPoE
|
Displays the following PPPoE information:
- PPPoE Interfaces—Session-specific information about the
interfaces on which PPPoE is enabled.
- PPPoE Statistics—Statistics for PPPoE sessions currently
active.
- PPPoE Version—Information about the PPPoE protocol currently
configured on the router.
For details, see Monitoring PPPoE.
|
- PPPoE interfaces—show pppoe interfaces
- PPPoE statistics—show pppoe statistics
- PPPoE version—show pppoe version
|
|
Media Gateway
|
Displays the following TGM550 Media Gateway information:
- Dynamic Call Admission Control Information—Displays maximum
bandwidth available for voice traffic and the dynamic call admission control
(CAC) properties configured on the router WAN interfaces.
- Telephony Gateway Module Information—Displays the IP addresses
of Media Gateway Controllers (MGCs) configured on the TGM550.
For details, see Monitoring the TGM550 Media Gateway (VoIP).
|
- Dynamic call admission control information—show tgm
dynamic-call-admission-control
- Telephony Gateway Module information—show tgm fpc slot-number media-gateway-controller
|