Errata

• Payload loopback functionality is not supported on ATM-over-SHDSL interfaces. [J-series Services Router Basic LAN and WAN Access Configuration Guide]
• Information about FRF.12 specification for fragmenting Frame Relay frames on J-series Services Routers needs to be added to the J-series documentation. The standard for FRF.12 is defined in the specification FRF.12, Frame Relay Fragmentation Implementation Agreement. [J-series Services Router Basic LAN and WAN Access Configuration Guide]
• For 4-port Fast Ethernet ePIMs on J4350 and J6350 Services Routers, if you apply a CoS scheduler map on outgoing (egress) traffic, the router does not divide the bandwidth appropriately among the CoS queues. As a workaround, configure enforced CoS shaping on the ports. [J-series Services Router Advanced WAN Access Configuration Guide]
• On J-series Services Routers, if you create a policy to match IPv4 traffic with a route filter and assign the traffic to a forwarding class, then apply the policy at the [edit class-of-service forwarding-policy class policy-name] hierarchy level, use of the classification-override statement at the [edit class-of-service forwarding-policy class policy-name] hierarchy level is not supported. [J-series Services Router Advanced WAN Access Configuration Guide]
• The J-series documentation states that you can timestamp UDP ping and UDP ping timestamp RPM probes. However, the Services Router supports hardware timestamping of UDP ping and UDP ping timestamp RPM probes only if the destination port is UDP-ECHO. [J-series Services Router Administration Guide]