J-series™ Services Router Basic LAN and WAN Access Configuration Guide

Verify that the static routes are in the routing table and that those routes are active.

Purpose

Verify static route configuration as follows by displaying the routing table and checking its contents.

Action

user@host> show route terse

inet.0: 20 destinations, 20 routes (20 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both

A Destination        P Prf   Metric 1   Metric 2  Next hop        AS path
* 192.168.47.5/32        S   5                        Reject
* 172.16.0.0/12      S   5                       >192.168.71.254
* 192.168.0.0/18     S   5                       >192.168.71.254
* 192.168.40.0/22    S   5                       >192.168.71.254
* 192.168.64.0/18    S   5                       >192.168.71.254
* 192.168.64.0/21    D   0                       >fxp0.0       
* 192.168.71.246/32  L   0                        Local
* 192.168.220.4/30   D   0                       >ge-0/0/1.0   
* 192.168.220.5/32   L   0                        Local
* 192.168.220.8/30   D   0                       >ge-0/0/2.0   
* 192.168.220.9/32   L   0                        Local
* 192.168.220.12/30  D   0                       >ge-0/0/3.0   
* 192.168.220.13/32  L   0                        Local
* 192.168.220.17/32  L   0                        Reject
* 192.168.220.21/32  L   0                        Reject
* 192.168.220.24/30  D   0                       >at-1/0/0.0   
* 192.168.220.25/32  L   0                        Local
* 192.168.220.28/30  D   0                       >at-1/0/1.0   
* 192.168.220.29/32  L   0                        Local
* 224.0.0.9/32       R 100          1             MultiRecv

What it Means

The output shows a list of the routes that are currently in the inet.0 routing table. Verify the following information:

Verifying the Static Route Configuration

Purpose

Action

What it Means