[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Deleting a Network Interface with a Configuration Editor

To delete an interface on a Services Router:

  1. Navigate to the top of the configuration hierarchy in either the J-Web or CLI configuration editor.
  2. Perform the configuration tasks described in Table 39.

Performing this action removes the interface from the software configuration and disables it. Network interfaces remain physically present, and their identifiers continue to appear on the J-Web Monitor and Quick Configuration pages.

Table 39: Deleting an Interface

Task

J-Web Configuration Editor

CLI Configuration Editor

Navigate to the Interfaces level in the configuration hierarchy.
  1. In the J-Web interface, select Configuration>Edit Configuration>View and Edit.
  2. Next to Interfaces, click Edit.

From the [edit] hierarchy level, enter

edit interfaces

Select the interface you want to delete.

In the Interface table, under Interface name, select the name of the interface you want to delete.

For information about interface names, see Network Interface Naming.

Enter

delete interface-name

Execute the selection.
  1. Click Discard.
  2. In the page that appears, select the appropriate option button.

    If you have not made any previous changes, the only selection available is Delete Configuration Below This Point.

Commit the configuration change:

commit

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

[an error occurred while processing this directive]