Errata

• Payload loopback functionality is not supported on ATM-over-SHDSL interfaces. [J-series Services Router Basic LAN and WAN Access Configuration Guide]
• RS-232 serial interfaces cannot function error-free with a clock rate greater than 200 KHz. [J-series Services Router Basic LAN and WAN Access Configuration Guide]
• The power supplies on J6300 and J6350 Services Routers only are field-replaceable units (FRUs). The fixed power supplies on other models are not field replaceable. [Getting Started Guide for your router]
• On Gigabit Ethernet interfaces, autonegotiation is enabled (not disabled) by default. When autonegotiation is disabled and no link mode or speed is configured, the link is negotiated in full duplex mode at 1000 Mbps. [J-series Services Router Basic LAN and WAN Access Configuration Guide]
• For 4-port Fast Ethernet ePIMs on J4350 and J6350 Services Routers, if you apply a CoS scheduler map on outgoing (egress) traffic, the router does not divide the bandwidth appropriately among the CoS queues. As a workaround, configure enforced CoS shaping on the ports. [J-series Services Router Advanced WAN Access Configuration Guide]
• For J-series Services Routers deploying strict high-priority scheduling, the manuals incorrectly state that the out-of-profile limit does not work when you configure shaping on the interface. The out-of-profile limit does in fact work with shaping. [J-series Services Router Advanced WAN Access Configuration Guide]