Removing and Installing the USB Storage Device

USB storage devices are optional components on J-series Services Routers. If installed, a USB storage device provides secondary storage for the router. It can accommodate software images, configuration files, and microcode. If the primary compact flash disk fails on startup, and the removable compact flash disk is not installed or fails, the router boots from the USB storage device.

For information about configuring the USB storage device, see the J-series Services Router Administration Guide.

For a list of supported USB storage devices, see the J-series Services Router Release Notes at https://www.juniper.net.

To remove and install a USB storage device, perform the following procedures:

• Removing the USB Storage Device
• Installing the USB Storage Device