 |
In the show chassis hardware command, the PIM slot number is reported as an FPC number and the PIM number (always 0) is reported as the PIC number. |
Before contacting Juniper Networks to request a Return Materials Authorization (RMA), you must find the serial number on the router or component. To list the router components and their serial numbers, enter the following command-line interface (CLI) command:
user@host> show chassis hardware
Hardware inventory: Item Version Part number Serial number Description Chassis 015810200500 J6350 Midplane REV 00 710-012339 System IO REV 00 710-012315 JX350 System IO Routing Engine REV 00 710-012151 RE-J6350-3400 HW crypto Crypto accelerator FPC 0 FPC PIC 0 4x GE Base PIC
|
In the show chassis hardware command, the PIM slot number is reported as an FPC number and the PIM number (always 0) is reported as the PIC number. |
Most components also have a serial number ID label (see Figure 56) attached to the component body.
J4350 and J6350 Services Routers have two serial number ID labels, one on the back of the chassis, as shown in Figure 55, and one on the bottom front corner, as shown in Figure 56.
Figure 55: Location of Serial Number ID Label on Back of Chassis
Figure 56: Location of Serial Number ID Label on Bottom of Chassis
The following sections describe the label location on each type of component: