[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]
Verifying Autoinstallation
To verify that a Services Router is configured for autoinstallation,
perform the following task.
Verifying Autoinstallation
Status
Purpose
Display the status of the autoinstallation feature on a Services Router.
Action
From the CLI, enter the show system autoinstallation
status command.
| |
user@host> show system autoinstallation status
Autoinstallation status:
Master state: Active
Last committed file: None
Configuration server of last committed file: 10.25.100.1
Interface:
Name: ge-0/0/0
State: Configuration Acquisition
Acquired:
Address: 192.168.124.75
Hostname: host-ge-000
Hostname source: DNS
Configuration filename: router-ge-000.conf
Configuration filename server: 10.25.100.3
Address acquisition:
Protocol: DHCP Client
Acquired address: None
Protocol: RARP Client
Acquired address: None
Interface:
Name: ge-0/0/1
State: None
Address acquisition:
Protocol: DHCP Client
Acquired address: None
Protocol: RARP Client
Acquired address: None
|
What it Means
The output shows the parameters configured for autoinstallation. Verify
that the values displayed are correct for the Services Router when it
is deployed on the destination network.
[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]