[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Monitoring the Media Gateway

Select Monitor>Media Gateway in the J-Web interface.

Alternatively, enter the show tgm dynamic-call-admission-control command.

Table 117 summarizes key output fields in media gateway information displays.

Table 117: Summary of Key Media Gateway Information Output Fields

Field	Values	Additional Information
Dynamic Call Admission Control Information
Reported Bearer Bandwidth Limit	Maximum bandwidth available for voice traffic on the Services Router.	If dynamic CAC is configured on more than one active interface, the TGM550 reports the bearer bandwidth limit (BBL) of the active interface with the highest activation priority. If more than one active interface has the same activation priority, the BBL is reported as the number of those interfaces times their lowest BBL. For example if two interfaces with the same activation priority have BBLs of 2000 Kbps and 1500 Kbps, the RBBL is 3000 Kbps (2 x 1500 Kbps).
Interface Name	Name of interface on which dynamic CAC is configured.
State	Link state of the interface: Up or Down.	The operational state is the physical state of the interface. If the interface is physically operational, even if it is not configured, the operational state is Up. An operational state of Down indicates a problem with the physical interface.
Activation Priority	Activation priority configured on the interface.
Bearer Bandwidth Limit (Kbps)	Maximum bandwidth available for voice traffic on the interface.
Telephony Gateway Module Information
Media Gateway Controller (MGC) List	IP addresses of the MGCs configured in the MGC list for the TGM550.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]