[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Configuring Unrestricted Proxy ARP

In this example, you will configure unrestricted proxy Address Resolution Protocol (ARP) on the Gigabit Ethernet interface ge-0/0/3 that is on the same subnet as that of the TGM550.

For information about configuring unrestricted proxy ARP, see the JUNOS Network Interfaces Configuration Guide.

To configure unrestricted proxy ARP on the ge-0/0/3 interface:

  1. Navigate to the top of the interfaces configuration hierarchy in either the J-Web or CLI configuration editor.
  2. Perform the configuration tasks described in Table 116.
  3. If you are finished configuring the router, commit the configuration.

Table 116: Configuring Unrestricted Proxy ARP

Task

J-Web Configuration Editor

CLI Configuration Editor

Navigate to the Interfaces level in the configuration hierarchy.

  1. In the J-Web interface, select Configuration>Edit Configuration>View and Edit.
  2. Next to Interfaces, click Edit.

From the [edit] hierarchy level, enter

edit interfaces ge-0/0/3

Select the Gigabit Ethernet interface ge-0/0/3

In the Interface name column, click ge-0/0/3.

Configure unrestricted proxy ARP on logical unit 0 of the ge-0/0/3 interface.
  1. Under Unit, next to 0, click Edit.
  2. Next to Proxy arp, selectYes.
  3. Click OK until you return to the Interfaces page.
  1. Enter

    edit unit 0

  2. Enter

    set proxy-arp

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

[an error occurred while processing this directive]