[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

VoIP Interfaces

Five types of interfaces provide VoIP connectivity on J4350 and J6350 Services Routers:

Analog telephone or trunk port
T1 port
E1 port
RJ-45 ISDN BRI telephone or trunk port

These interfaces are available on the field-replaceable Avaya VoIP modules listed in Table 99.

Table 99: Avaya VoIP Modules

Module Name	Description	VoIP Interfaces	JUNOS Interface
TGM550	Avaya Telephony Gateway Module (TGM)	Two analog telephone ports Two analog trunk ports One serial port for console access	vp-pim/0/0
TIM510	Avaya DS1 Telephony Interface Module (TIM)	One T1 or E1 trunk port
TIM514	Avaya Analog TIM	Four analog telephone ports Four analog trunk ports
TIM521	Avaya BRI TIM	Four RJ-45 ports for ISDN BRI trunk connections

Only the TGM550 has a JUNOS interface. Because the TIMs do not have corresponding physical interfaces, you cannot configure them with the J-Web interface or the JUNOS CLI. However, you can display TGM550 and TIM status from J-Web Monitor>Chassis pages and with show chassis commands.

The TGM550 and TIMs are not hot-swappable. You must power off the router before the installing or removing the Avaya VoIP modules. Ensure that the Avaya VoIP modules are installed in the router chassis before booting up the system.

The Avaya VoIP modules are described in the following sections:

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]