[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Configuring DS1, DS3, Ethernet, and Serial Interfaces with Quick Configuration

The Quick Configuration page allows you to configure most network interfaces on a Services Router, as shown in Figure 22.

Figure 22: Quick Configuration Interfaces Page

Image s020208.gif

To configure a network interface with Quick Configuration:

  1. In the J-Web user interface, select Configuration>Quick Configuration>Interfaces.

    A list of the network interfaces present on the Services Router is displayed, as shown in Figure 22. The third column indicates whether the interface has been configured.

    The channelized T1 and E1 interfaces are not displayed in the list of interfaces on the J-Web Quick Configuration Interfaces page. However, you can configure and view channelized T1 and E1 interfaces with the J-Web configuration editor. For details, see Configuring a Channelized T1 or E1 interface with a Configuration Editor.

  2. To configure properties for a network interface, select the interface name and proceed with configuration as described in one of the following topics:
[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

[an error occurred while processing this directive]