| Logical Interfaces
|
|
Logical Interfaces
|
Lists the logical interfaces for the PPPoE physical interface.
|
- To add a logical interface, click Add.
- To edit a logical interface, select the interface from the list.
- To delete a logical interface, select the check box next to the
name and click Delete.
|
|
Add logical interfaces
|
Defines one or more logical units that you connect to this physical
PPPoE interface. You must define at least one logical unit for a PPPoE interface.
|
Click Add.
|
|
Logical Interface Description
|
(Optional) Describes the logical interface.
|
Type a text description of the logical interface to more clearly identify
it in monitoring displays.
|
|
IPv4 Addresses and Prefixes
|
Specifies one or more IPv4 addresses for the interface.
|
- Type one or more IPv4 addresses and prefixes. For example:
10.10.10.10/24
- Click Add.
- Click OK.
|
|
Physical Interface Description
|
(Optional) Adds supplementary information about the physical PPPoE interface.
|
Type a text description of the PPPoE interface to more clearly identify
it in monitoring displays.
|
| PPP Options
|
|
Enable CHAP
|
Enables or disables CHAP authentication on a PPPoE interface.
|
- To enable CHAP, select the check box.
- To disable CHAP, clear the check box.
|
| CHAP Local
Identity (available if CHAP is enabled) |
|
Use System Host Name
|
Specifies that the PPPoE interface uses the Services Router's system hostname
in CHAP challenge and response packets.
|
- To enable, select the check box (the default).
- To disable, clear the check box.
|
|
Local Name
|
If Use System Host Name is disabled, specifies the local name for CHAP
to use.
|
Type a local name for this PPPoE interface.
|
|
CHAP Peer Identity (required if CHAP is enabled)
|
Identifies the client or peer with which the Services Router communicates
on this PPPoE interface.
|
Type the CHAP client name.
|
|
CHAP Secret (required if CHAP is enabled)
|
Specifies the secret password for CHAP authentication, known to both
sides of the connection.
|
Type a password that is known to the other side of the connection. Use
a combination of letters and numbers that is difficult for others to guess.
|
| PPPoE Options
|
|
Access Concentrator
|
Identifies the access concentrator by a unique name.
|
Type a name for the access concentrator—for example, ispl.com.
|
|
Auto Reconnect Time
|
Specifies the number of seconds to wait before reconnecting after a
PPPoE session is terminated.
|
Type a value from 1 through 4294947295 for automatic
reconnection—for example, 100 seconds. Type 0 (the
default) for immediate reconnection.
|
|
Idle Timeout
|
Specifies the number of seconds a session can be idle without disconnecting.
|
Type a value for the timeout. Type 0 if you do not want the
session to time out.
|
|
Service Name
|
Identifies the type of service provided by the access concentrator, such as the name
of the Internet service provider (ISP), class, or quality of service.
|
Type the type of service provided by the access concentrator. For example, video@ispl.com.
|
|
Underlying Interface
|
Specifies the logical Ethernet interface or the logical ATM interface
as the underlying interface for the PPPoE session.
|
From the list, select the underlying interface for the PPPoE session—for
example, fe-0/0/1.0 or at-2/0/0.0.
|
