[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Stateful Firewall Filter Actions

Table 67 and Table 72 list actions you can specify in stateful firewall filter terms.

Table 67: Stateful Firewall Filter Actions

Actions	Description
accept	Accepts the packet and send it to its destination.
allow-ip-options [ values ]	Accepts the packet if the IP Option header of the packet contains a value that matches one of the specified values. If this action is not included, only packets without IP options are accepted. This action can be specified only with the accept action. You can specify the IP option as text or a numeric value: any (0), ip-security (130), ip-stream (8), loose-source-route (3), route-record (7), router-alert (148), strict-source-route (9), and timestamp (4).
discard	Does not accept the packet, and do not process it further.
reject	Does not accept the packet, and sends a rejection message. UDP sends an ICMP unreachable code and RCP sends RST. Rejected packets can be logged or sampled.
syslog	Records information in the system logging facility. This action can be used with all options except discard.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]