|
Remote Host
|
Identifies the destination host of the traceroute.
|
Type the hostname or IP address of the destination host.
|
| Advanced Options
|
|
Don't Resolve Addresses
|
Determines whether hostnames of the hops along the path are displayed,
in addition to IP addresses.
|
- To suppress the display of the hop hostnames, select the check
box.
- To display the hop hostnames, clear the check box.
|
|
Gateway
|
Specifies the IP address of the gateway to route through.
|
Type the gateway IP address.
|
|
Source Address
|
Specifies the source address of the outgoing traceroute packets.
|
Type the source IP address.
|
|
Bypass Routing
|
Determines whether traceroute packets are routed by means of the routing
table.
If the routing table is not used, traceroute packets are sent only
to hosts on the interface specified in the Interface box. If the host is not
on that interface, traceroute responses are not sent.
|
- To bypass the routing table and send the traceroute packets to
hosts on the specified interface only, select the check box.
- To route the traceroute packets by means of the routing table,
clear the check box.
|
|
Interface
|
Specifies the interface on which the traceroute packets are sent.
|
From the list, select the interface on which traceroute packets are
sent. If you select any, the traceroute requests are
sent on all interfaces.
|
|
Time-to-Live
|
Specifies the maximum time-to-live (TTL) hop count for the traceroute
request packet.
|
From the list, select the TTL.
|
|
Type-of-Service
|
Specifies the type-of-service (TOS) value to include in the IP header
of the traceroute request packet.
|
From the list, select the decimal value of the TOS field.
|
|
Resolve AS Numbers
|
Determines whether the autonomous system (AS) number of each intermediate
hop between the router and the destination host is displayed.
|
- To display the AS numbers, select the check box.
- To suppress the display of the AS numbers, clear the check box.
|
