|
Ingress LSP
|
Information about inbound RSVP sessions. Each session has one line of
output.
|
|
|
Egress LSP
|
Information about outbound RSVP sessions. Each session has one line
of output.
|
MPLS learns this information by querying RSVP, which holds all the transit
and outbound session information.
|
|
Transit LSP
|
Information about transit RSVP sessions.
|
MPLS learns this information by querying RSVP, which holds all the transit
and outbound session information.
|
|
To
|
Destination (outbound router) of the session.
|
|
|
From
|
Source (inbound router) of the session.
|
|
|
State
|
State of the path: Up, Down,
or AdminDn.
|
AdminDn indicates that the LSP is being taken down
gracefully.
|
|
Rt
|
Number of active routes (prefixes) installed in the routing table.
|
For inbound RSVP sessions, the routing table is the primary IPv4 table
(inet.0). For transit and outbound RSVP sessions, the routing table
is the primary MPLS table (mpls.0).
|
|
Style
|
RSVP reservation style. This field consists of two parts. The first
is the number of active reservations. The second is the reservation style,
which can be FF (fixed filter), SE (shared explicit), or WF (wildcard
filter).
|
This field is used for outbound and transit LSPs only.
|
|
Labelin
|
Incoming label for this RSVP session.
|
|
|
Labelout
|
Outgoing label for this RSVP session.
|
|
|
LSPname
|
Configured name of the LSP.
|
|
|
Total
|
Total number of RSVP sessions displayed for the particular type—ingress (inbound), egress (outbound),
or transit).
|
|