| DHCP Pool Information |
|
DHCP Subnet (required)
|
Specifies the subnet on which DHCP is configured.
|
Type an IP address prefix.
|
|
Address Range (Low) (required)
|
Specifies the lowest address in the IP address pool range.
|
Type an IP address that is part of the subnet specified in DHCP Subnet.
|
|
Address Range (High) (required)
|
Specifies the highest address in the IP address pool range.
|
Type an IP address that is part of the subnet specified in DHCP Subnet.
This address must be greater than the address specified in Address Range (Low).
|
|
Exclude Addresses
|
Specifies addresses to exclude from the IP address pool.
|
Do either of the following:
- To add an excluded address, type the address next to the Add button,
and click Add.
- To delete an excluded address, select the address in the Exclude
Addresses box, and click Delete.
|
| Lease Time |
|
Maximum Lease Time (Seconds)
|
Specifies the maximum length of time a client can hold a lease. (Dynamic
BOOTP lease lengths can exceed this maximum time.)
|
Type a number between 60 and 4,294,967,295 (seconds). You can also type infinite to
specify a least that never expires.
|
|
Default Lease Time (Seconds)
|
Specifies the length of time a client can hold a lease, for clients
that do not request a specific lease length.
|
Type a number between 60 and 2,147,483,647 (seconds). You can also type infinite to
specify a least that never expires.
|
| Server Information |
|
Server Identifier
|
Specifies the IP address of the DHCP server reported to a client.
|
Type the IP address of the Services Router. If you do not specify
a server identifier, the primary address of the interface on which the DHCP
exchange occurs is used.
|
|
Domain Name
|
Specifies the domain name that clients must use to resolve hostnames.
|
Type the name of the domain.
|
|
Domain Search
|
Specifies the order—from top to bottom—in which clients
must append domain names when resolving hostnames using DNS.
|
Do either of the following:
- To add a domain name, type the name next to the Add button,
and click Add.
- To delete a domain name, select the name in the Domain Search
box, and click Delete.
|
|
DNS Name Servers
|
Defines a list of DNS servers the client can use, in order of preference—from
top to bottom.
|
Do either of the following:
- To add a DNS server, type an IP address next to the Add button,
and click Add.
- To remove a DNS server, select the IP address in the DNS Name
Servers box, and click Delete.
|
|
Gateway Routers
|
Defines a list of relay agents on the subnet, in order of preference—from
top to bottom.
|
Do either of the following:
- To add a relay agent, type an IP address next to the Add button,
and click Add.
- To remove a relay agent, select the IP address in the Gateway
Routers box, and click Delete.
|
|
WINS Servers
|
Defines a list of NetBIOS name servers, in order of preference—from
top to bottom.
|
Do either of the following:
- To add a NetBIOS name server, type an IP address next to the Add button, and click Add.
- To remove a NetBIOS name server, select the IP address in the
WINS Servers box, and click Delete.
|
| Boot Options |
|
Boot File
|
Specifies the path and filename of the initial boot file to be used
by the client.
|
Type a path and filename.
|
|
Boot Server
|
Specifies the TFTP server that provides the initial boot file to the
client.
|
Type the IP address or hostname of the TFTP server.
|
| DHCP Static
Binding Information
|
|
DHCP MAC Address (required)
|
Specifies the MAC address of the client to be permanently assigned a
static IP address.
|
Type the hexadecimal MAC address of the client.
|
|
Fixed IP Addresses (required)
|
Defines a list of IP addresses permanently assigned to the client. A
static binding must have at least one fixed address assigned to it, but multiple
addresses are also allowed.
|
Do either of the following:
- To add an IP address, type it next to the Add button,
and click Add.
- To remove an IP address, select it in the Fixed IP Addresses box,
and click Delete.
|
|
Host Name
|
Specifies the name of the client used in DHCP messages exchanged between
the server and the client. The name must be unique to the client within the
subnet on which the client resides.
|
Type a client hostname.
|
|
Client Identifier
|
Specifies the name of the client used by the DHCP server to index its
database of address bindings. The name must be unique to the client within
the subnet on which the client resides.
|
Type a client identifier in string form.
|
|
Hexadecimal Client Identifier
|
Specifies the name of the client, in hexadecimal, used by the DHCP server
to index its database of address bindings. The name must be unique to the
client within the subnet on which the client resides.
|
Type a client identifier in hexadecimal form.
|
