Configuring a Firewall Filter for Packet Capture (Optional)

Navigate to the Firewall level in the configuration hierarchy.

1. In the J-Web interface, select Configuration>View and Edit>Edit Configuration.
2. Next to Firewall, click Configure or Edit.

From the [edit] hierarchy level, enter

edit firewall

Define a firewall filter dest-all and a filter term—for example, dest-term—to capture packets with a particular destination address—for example, 192.168.1.1/32.

1. Next to Filter, click Add new entry.
2. In the filter name box, type dest-all.
3. Next to Term, click Add new entry.
4. In the Rule name box, type dest-term.
5. Next to From, click Configure.
6. Next to Destination address, click Add new entry.
7. In the Address box, type 192.168.1.1/32.
8. Click OK until you return to the Configuration page.

Set the filter and term name, and define the match condition and its action.

set firewall filter dest-all term dest-term from destination-address 192.168.1.1/32

set firewall filter dest-all term dest-term then sample accept

Navigate to the Interfaces level in the configuration hierarchy.

In the configuration editor hierarchy, select Interfaces.

Enter

set interfaces fe-0/0/1 unit 0 family inet filter output dest-all

Apply the dest-all filter to all the outgoing packets on the interface—for example, fe-0/0/1.0.

1. In the Interface name box, click fe-0/0/1.
2. In the Interface unit number box, click 0.
3. Next to Inet, select Yes, and click Edit.
4. Next to Filter, click Configure.
5. In the Output box, type dest-all.
6. Click OK until you return to the Interfaces page.