Dual-Port Fast Ethernet PIM

The Dual-Port 10/100-Mbps Fast Ethernet PIM (Figure 29) has two physical Fast Ethernet ports.

The Fast Ethernet PIM provides the following key features:

• Onboard network processor
• Full-duplex and half-duplex modes
• Media access control (MAC) address filtering
• Autonegotiation through medium-dependent interface (MDI) and MDI crossover (MDI–X) support

For pinouts of cable connectors for Fast Ethernet PIMs, see RJ-45 Connector Pinout for the Routing Engine (Ethernet) Port.

For alarms, see the configuring and monitoring alarms information in the J-series Services Router Administration Guide.

For installing and removing a PIM, see Replacing a PIM.

Fast Ethernet LEDs indicate link status, port speed, and activity. Table 30 describes the meaning of the LEDs.

Table 30: LEDs for Dual-Port Fast Ethernet PIM