[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Monitoring
Stateful Firewall Filters
To view stateful firewall filter information in the J-Web interface, select Monitor>Firewall>Stateful Firewall. To display stateful firewall
filter information for a particular address prefix, port, or other characteristic,
type or select information in one or more of the Narrow Search boxes, and
click OK.
Alternatively, enter the following CLI show commands:
-
show services stateful-firewall conversations
-
show services stateful-firewall flows
Table 60 summarizes key
output fields for stateful firewall filters.
Table 60: Summary of Key Stateful Firewall Filters Output Fields
|
Field
|
Values
|
|
Protocol
|
Protocol used for the specified stateful firewall flow.
|
|
Source IP
|
Source prefix of the stateful firewall flow.
|
|
Source Port
|
Source port number of stateful firewall flow.
|
|
Destination IP
|
Destination prefix of the stateful firewall flow.
|
|
Destination Port
|
Destination port number of the stateful firewall flow.
|
|
Flow State
|
Status of the stateful firewall flow:
-
Drop—Drop all packets in the flow without response.
-
Forward—Forward the packet in the flow without
inspecting it.
-
Reject—Drop all packets in the flow with response.
-
Watch—Inspect packets in the flow.
|
|
Direction
|
Direction of the flow: I (input) or O (output).
|
|
Frames
|
Number of frames in the flow.
|
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]