The console port on a J-series Services Router has an RJ-45 connector. Table 68 provides RJ-45 console connector pinout information. An RJ-45 cable is supplied with the router.
To connect the console port to an external management device, you need an RJ-45 to DB-9 serial port adapter which is also supplied with the router.
Table 68: RJ-45 Console Connector Pinout
|
Pin |
Signal |
Description |
|---|---|---|
|
1 |
Unused |
|
|
2 |
DSR |
Data Set Ready |
|
3 |
RD |
Receive Data |
|
4 |
GND |
Signal Ground |
|
5 |
GND |
Signal Ground |
|
6 |
TD |
Transmit Data |
|
7 |
DTR |
Data Terminal Ready |
|
8 |
Unused |
Table 69 describes the DB-9 connector pinouts.
Table 69: DB-9 Console Connector Pinout