Dual-Port Fast Ethernet PIM

The Dual-Port 10/100-Mbps Fast Ethernet PIM (Figure 29) is supported on J4300 and J6300 Services Routers. The Fast Ethernet PIM has two physical Fast Ethernet ports.

The Fast Ethernet PIM provides the following key features:

• Onboard network processor
• Full-duplex and half-duplex modes
• Media access control (MAC) address filtering
• Autonegotiation through medium-dependent interface (MDI) and MDI crossover (MDI–X) support

For pinouts of cable connectors for Fast Ethernet PIMs, see RJ-45 Connector Pinout for the Routing Engine (Ethernet) Port.

For alarms, see the configuring and monitoring alarms information in the J-series Services Router Administration Guide.

For installing and removing a PIM, see Replacing a PIM.

Fast Ethernet LEDs indicate link status, port speed, and activity. Table 31 describes the meaning of the LEDs.

Table 31: LEDs for Fast Ethernet Ports