[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring VPNs with a Configuration Editor

To configure a basic Layer 3 VPN, Layer 2 VPN, or Layer 2 circuit, perform the following tasks. Use Table 86 to help you select the tasks for your VPN type. For information about using the J-Web and CLI configuration editors, see Using J-Web Configuration Tools.

Configuring Interfaces Participating in a VPN
Configuring Protocols Used by a VPN
Configuring a VPN Routing Instance
Configuring a VPN Routing Policy

Table 86: VPN Configuration Task Summary

Section	Layer 3 VPN	Layer 2 VPN	Layer 2 Circuit
Configuring Interfaces Participating in a VPN	All Services Routers	All Services Routers	All Services Routers
Configuring Protocols Used by a VPN	All Services Routers	All Services Routers	All Services Routers
Configuring a VPN Routing Instance	PE Services Routers	PE Services Routers	N/A
Configuring a VPN Routing Policy	CE Services Routers (PE Services Routers if you are not using a route target)	PE Services Routers if you are not using a route target	N/A

[Contents] [Prev] [Next] [Index] [Report an Error]