Configuring Network Interfaces with a Configuration Editor

To enable the interfaces installed on your Services Router to work properly, you must configure their properties. You can perform basic interface configuration using the J-Web Quick Configuration pages, as described in Configuring Network Interfaces with Quick Configuration. You can perform the same configuration tasks using the J-Web or CLI configuration editor. In addition, you can configure a wider variety of options that are encountered less frequently.

You can perform the following tasks to configure interfaces:

• Adding a Network Interface with a Configuration Editor
• Adding an ATM-over-ADSL Network Interface with a Configuration Editor
• Configuring CHAP on the ATM-over-ADSL Interface (Optional)
• Adding an ATM-over-SHDSL Interface
• Configuring Compressed Real-Time Transport Protocol (CRTP)
• Deleting a Network Interface with a Configuration Editor

For information about using the J-Web and CLI configuration editors, see Using J-Web Configuration Tools.