Symbols
- ( ), in syntax descriptions 1
- [ ], in configuration statements 1
- { }, in configuration statements 1
- *,G notation, for multicast forwarding states 1
- #, comments in configuration statements 1
- < >, in syntax descriptions 1
- | (pipe), in syntax descriptions 1
- CSMA/CD (carrier sense multiple access with collision detection) 1
- media access control 1
A
- ABM, HDLC 1
- ABRs 1
- access concentrator
- as a PPPoE server 1
- naming for PPPoE 1
- action modifiers 1, 2
- actions
- default, routing policy 1
- final, routing policy 1
- NAT 1
- route list match types 1
- routing policy 1
- routing policy, summary of 1
- stateful firewall filters 1
- stateless firewall filters 1
- active routes, versus passive routes 1
- adaptive shaping, applying CoS rules to logical interfaces 1
- Add button 1
- Add new entry link 1
- addresses
- BGP external peer address (configuration editor) 1
- BGP internal peer address (configuration editor) 1
- BGP local address (Quick Configuration) 1
- BGP peer address (Quick Configuration) 1
- multicast ranges 1
- physical, in data link layer 1
- translating 1
- address match conditions 1
- address translation 1
- administrative groups, for MPLS path selection 1
- administrative scoping 1
- ADSL ports 1
- advertisements 1
- AF 1
- aggregation, route 1
- alternate mark inversion 1
- AMI (alternate mark inversion) encoding
- overview 1
- E1 1
- T1 1
- Annex A PIMs
- ATM-over-ADSL interfaces 1
- standards supported 1
- operating modes 1
- Annex B PIMs
- ATM-over-ADSL interfaces 1
- operating modes 1
- standards supported 1
- ANSI DMT operating mode 1
- anycast IPv6 addresses 1
- Apply button 1
- area border routers
- adding interfaces 1
- area ID (configuration editor) 1
- backbone area 1
- backbone area interface 1
- description 1
- areas 1
- ARM, HDLC 1
- AS path
- description 1
- forcing by MED 1
- prepending 1
- role in route selection 1
- ASs (autonomous systems)
- area border routers 1
- AS number, in VPNs 1
- AS number (Quick Configuration) 1
- breaking into confederations 1
- description 1
- group AS number (configuration editor) 1
- individual AS number (configuration editor) 1
- LSPs through 1
- sample BGP confederation 1
- stub areas 1
- sub-AS number 1
- AS number (configuration editor) 1
- assured forwarding 1
- asymmetrical digital subscriber line (ADSL) 1
- Asynchronous Balance Mode, HDLC 1
- asynchronous networks
- data stream clocking 1
- explicit clocking signal transmission 1
- overview 1
- Asynchronous Response Mode, HDLC 1
- Asynchronous Transfer Mode (ATM) interface 1
- at-0/0/0 1
- ATM interface 1
- ATM NLPID encapsulation 1
- ATM-over-ADSL interfaces 1
- ATM PPP over AAL5 LLC encapsulation 1
- ATM PVC encapsulation 1
- ATM SNAP encapsulation 1
- ATM VC multiplex encapsulation 1
- authentication
- CHAP, for PPPoE interfaces 1
- OSPF, MD5 1
- OSPF, plain-text passwords 1
- RIPv2, MD5 1
- RIPv2, plain-text passwords 1
- auto operating mode 1
- Auto-RP 1
B
- B8ZS encoding 1
- backbone area
- area ID (configuration editor) 1
- area ID (Quick Configuration) 1
- area type (Quick Configuration) 1
- configuring 1
- description 1
- interface 1
- backoff algorithm, collision detection 1
- backup connection, ISDN 1
- backward-explicit congestion notification (BECN) bits 1
- BA classifiers 1
- bandwidth, for RSVP-signaled LSPs 1
- bandwidth-on-demand
- dialer interface 1
- ISDN interface 1
- overview 1
- bc-0/0/0 1
- B-channels
- description 1
- naming convention 1
- verifying 1
- BECN (backward-explicit congestion notification) bits 1
- behavior aggregate classifiers 1
- BERTs (bit error rate tests) 1
- best-effort service 1
- BGP (Border Gateway Protocol)
- AS path 1
- confederations 1
- enabling (Quick Configuration) 1
- export policy for CLNS 1
- external 1
- external neighbor (peer) address (configuration editor) 1
- for CLNS VPN NLRI 1
- full mesh requirement 1, 2
- injecting OSPF routes into BGP 1
- internal 1
- internal neighbor (peer) address (configuration editor) 1
- local address (Quick Configuration) 1
- local preference 1
- MED metric 1
- origin value 1
- overview 1, 2
- peer address (Quick Configuration) 1
- peering sessions 1
- point-to-point internal peer session (configuration editor) 1
- point-to-point peer session (configuration editor) 1
- policy to make routes less preferable 1
- Quick Configuration 1
- requirements 1
- route-flap damping 1
- route reflectors 1
- route selection process 1
- routing policy (configuration editor) 1
- sample BGP peer network 1
- sample confederation 1
- sample full mesh 1
- sample route reflector 1
- scaling techniques 1
- session establishment 1
- session maintenance 1
- verifying BGP configuration 1
- verifying BGP groups 1
- verifying BGP peers (neighbors) 1
- verifying peer reachability 1
- VPNs 1
- AS number (Quick Configuration) 1
- peer AS number (Quick Configuration) 1
- router ID (Quick Configuration) 1
- external group type (configuration editor) 1
- internal group type (configuration editor) 1
- BGP confederations
- confederation number 1
- creating (configuration editor) 1
- description 1, 2
- route-flap damping 1
- sample network 1
- sub-AS number 1
- confederation members 1
- BGP groups
- cluster identifier (configuration editor) 1
- confederations (configuration editor) 1
- external, creating (configuration editor) 1
- external group type (configuration editor) 1
- internal group type (configuration editor) 1
- verifying 1
- group AS number (configuration editor) 1
- internal, creating (configuration editor) 1
- internal, creating for a route reflector (configuration editor) 1
- BGP messages
- to establish sessions 1
- update, to maintain sessions 1
- BGP page 1
- BGP peers
- directing traffic by local preference 1
- external (configuration editor) 1
- internal, sample full mesh 1
- internal, sample route reflector 1
- internal (configuration editor) 1
- peer address (Quick Configuration) 1
- peer AS number (Quick Configuration) 1
- point-to-point connections 1
- routing policy (configuration editor) 1
- sample peer network 1
- sessions between peers 1
- verifying 1, 2
- verifying reachability 1
- BGP route reflectors
- cluster of clusters 1
- creating (configuration editor) 1
- description 1, 2
- group type (configuration editor) 1
- multiple clusters 1
- sample IBGP network 1
- cluster (configuration editor) 1
- cluster identifier (configuration editor) 1
- BGP sessions
- configured at both ends 1
- establishment 1
- maintenance 1
- point-to-point external (configuration editor) 1
- point-to-point internal (configuration editor) 1
- sample peering session 1
- types 1
- bipolar with 8–zero substitution (B8ZS) encoding 1
- bit error rate tests (BERTs) 1
- bit-field logical operators, stateless firewall filters 1
- bit-field match conditions 1
- bit-field synonym match conditions 1
- bit stuffing 1
- bootstrap router 1
- Border Gateway Protocol 1
- br-0/0/0 1
- braces, in configuration statements 1
- brackets
- angle, in syntax descriptions 1
- square, in configuration statements 1
- branches 1
- bridges, on LAN segments 1
- BSR (bootstrap router) 1
- buttons 1
C
- cables
- T1 cable length 1
- T3 cable length 1
- call setup, ISDN 1
- Cancel button
- J-Web configuration editor 1
- Quick Configuration 1
- canceling a commit 1, 2
- carrier sense multiple access with collision detection (CSMA/CD) 1
- C-bit parity frame format
- enable or disable on T3 ports 1
- overview 1
- ccc protocol family 1
- CE (customer edge) routers 1
- Challenge Handshake Authentication Protocol 1
- channel number, in interface name 1
- channel service unit (CSU) device 1
- CHAP (Challenge Handshake Authentication Protocol)
- enabling for PPPoA 1
- enabling for PPPoE 1
- overview 1
- PPP links 1
- PPPoE 1
- enabling on E1 1
- enabling on E3 1
- enabling on serial interfaces 1
- enabling on T1 1
- enabling on T3 1
- E1 local identity 1
- E3 local identity 1
- serial interface local identity 1
- T1 local identity 1
- T3 local identity 1
- CHAP secret 1
- checksum
- E1 frame 1
- E3 frame 1
- overview 1
- T1 frame 1
- T3 frame 1
- circuit 1
- Cisco NLPID encapsulation 1
- classful addressing 1
- classifiers
- applying BA classifiers 1, 2
- default BA classifiers 1
- description 1
- sample, for firewall filter 1
- sample BA classification 1
- sample BA classifier assignments 1
- class of service 1
- clear system commit command 1
- clickable configuration 1
- CLI configuration editor
- activating a configuration 1
- BGP 1
- CLNS 1
- command summary 1
- committing files 1
- confirming a configuration 1
- exiting 1
- IPSec tunnels 1
- ISDN connections 1
- managing files 1
- modifying a configuration 1
- MPLS traffic engineering 1
- network interfaces 1
- OSPF 1
- PPPoE 1
- PPPoE over ATM-over-ADSL 1
- RIP 1
- saving files 1
- starting 1
- static routes 1
- using show commands with 1
- verifying a configuration 1
- VPNs 1
- CLNS (Connectionless Network Service) VPNs
- BGP, to carry CLNS VPN NLRI 1
- BGP export policy 1
- displaying configurations 1
- ES-IS 1
- IS-IS 1
- linking hosts 1
- overview 1
- requirements 1
- static routes (without IS-IS) 1
- verifying configuration 1
- VPN routing instance 1
- clocking
- data stream clocking 1
- explicit clocking signal transmission 1
- overview 1
- serial interface, inverting the transmit clock 1, 2
- serial interface, modes 1
- E1 1
- E3 1
- serial interface 1
- T1 1
- T3 1
- clock rate, serial interface
- DTE default reduction 1
- values 1
- clusters 1
- collision detection
- backoff algorithm 1
- overview 1
- coloring, link, for MPLS path selection 1
- combined stations, HDLC 1
- comments, in configuration statements 1
- commit and-quit command 1
- commit at command 1
- Commit button 1
- commit check command 1
- commit command 1
- commit confirmed command 1
- committed configuration
- activating (CLI configuration editor) 1
- comparing two configurations 1
- confirming (CLI configuration editor) 1
- description 1
- replacing (CLI configuration editor) 1
- rescue configuration (CLI configuration editor) 1
- rescue configuration (J-Web) 1
- scheduling (CLI configuration editor) 1
- summaries 1
- verifying (CLI configuration editor) 1
- viewing previous (CLI configuration editor) 1
- canceling a commit (CLI configuration editor) 1
- methods 1
- storage location 1
- Compressed Real-Time Transport Protocol 1
- confederations 1
- CONFIG button
- default behavior 1, 2
- disabling 1
- return to factory configuration 1, 2
- config-button <no-rescue> <no-clear> statement 1
- configuration
- activating (CLI configuration editor) 1
- adding a statement (CLI configuration editor) 1
- basic 1
- changing part of a file (CLI configuration editor) 1
- CLI commands 1
- CLI configuration mode 1
- committed 1
- committing (CLI configuration editor) 1
- committing (J-Web) 1
- committing as a text file, with caution (J-Web) 1
- confirming (CLI configuration editor) 1
- copying a statement 1
- deactivating a statement 1
- deleting a statement 1
- deleting with the CONFIG button 1, 2
- disabling CONFIG button 1
- discarding changes (J-Web) 1
- downloading (J-Web) 1
- editing (J-Web) 1, 2
- editing as a text file, with caution (J-Web) 1
- history 1
- inserting an identifier 1
- J-Web options 1
- loading new (CLI configuration editor) 1
- loading previous (CLI configuration editor) 1
- loading previous (J-Web) 1
- locked, with the configure exclusive command 1
- managing files (CLI configuration editor) 1
- managing files (J-Web) 1
- merging (CLI configuration editor) 1
- modifying (CLI configuration editor) 1
- modifying a statement (CLI configuration editor) 1
- overriding (CLI configuration editor) 1
- renaming an identifier 1
- replacing configuration statements (CLI configuration editor) 1
- requirements 1
- rescuing (CLI configuration editor) 1
- rescuing (J-Web) 1
- rollback (CLI configuration editor) 1
- rollback (J-Web) 1
- saving (CLI configuration editor) 1
- uploading (J-Web) 1
- users-editors, viewing 1
- verifying (CLI configuration editor) 1
- viewing as a text file (J-Web) 1
- configuration database, summary 1
- configuration hierarchy, navigating 1
- configuration history
- comparing files 1
- database summary 1
- displaying 1
- downloading files 1
- summary 1
- users-editors, viewing 1
- Configuration History page 1
- configuration mode
- entering and exiting 1
- using show commands in 1
- configuration text
- editing and committing, with caution 1
- viewing 1
- configuration tools 1
- configure command 1
- configure exclusive command 1
- Configure link 1
- configure private command 1
- confirming a configuration 1
- congestion control
- for Frame Relay, with DE bits 1
- with DiffServ assured forwarding 1
- Connectionless Network Service 1
- connection process
- ISDN BRI interfaces 1
- LCP, for PPP 1
- serial interfaces 1
- connectivity
- bidirectional (BGP) 1
- bidirectional (OSPF) 1
- unidirectional (RIP) 1
- Constrained Shortest Path First 1
- conventions
- for interface names 1
- how to use this guide 1
- notice icons 1
- text and syntax 1
- copy command 1
- CoS (class of service)
- adaptive shaping for rules 1
- assigning forwarding classes to output queues 1
- BA classifiers 1
- configuration tasks 1
- default BA classifiers 1
- default forwarding class queue assignments 1
- default scheduler settings 1
- DiffServ benefits 1
- DSCP rewrites 1
- DSCPs 1
- firewall filter for a multifield classifier 1
- JUNOS components 1
- JUNOS implementation 1
- policer for firewall filter 1
- preparation 1
- RED drop profiles 1
- rewrite rules 1
- sample BA classification 1
- scheduler maps 1
- schedulers 1
- uses 1
- verifying adaptive shaper configuration 1
- verifying multicast session announcements 1
- verifying virtual channel configuration 1
- verifying virtual channel group configuration 1
- virtual channels for rules 1
- cost, of a network path 1
- CPE device, Services Router as, with PPPoE 1
- CRC (cyclic redundancy check) 1
- CRTP (Compressed Real-Time Transport Protocol)
- E1 interfaces 1
- overview 1
- T1 interfaces 1
- CSPF (Constrained Shortest Path First)
- constraints 1
- link coloring 1
- rules 1
- disabling 1
- CSPF algorithm 1
- CSU (channel service unit) device 1
- curly braces, in configuration statements 1
- customer edge routers 1
- customer premises equipment (CPE) device, Services Router as, with PPPoE 1
- customer support 1,
- contacting JTAC 1
- 1
- cyclic redundancy check (CRC) 1
D
- D4 framing 1
- Database Information page 1
- data communications equipment 1
- data inversion
- E1 1
- T1 1
- data-link connection identifiers (DLCIs) 1
- data link layer
- error notification 1
- flow control 1
- frame sequencing 1
- MAC addresses 1
- network topology 1
- physical addressing 1
- purpose 1
- sublayers 1
- data service unit (DSU) device 1
- data stream clocking 1
- data terminal equipment 1
- dc-0/0/0 1
- DCE (data communications equipment)
- serial device 1
- serial connection process 1
- DCE clocking mode 1
- D-channel
- description 1
- naming convention 1
- verifying 1
- DDR 1
- DE (discard eligibility) bits
- BECN bits 1
- FECN bits 1
- deactivate command 1
- deactivating configuration statements or identifiers 1
- default gateway, static routing 1
- defaults
- BA classifiers 1
- CoS forwarding class assignments 1, 2
- junos-algs-outbound group, stateful firewall filters 1
- routing policy actions 1
- setting for static routes 1
- Delete button 1
- delete command 1
- Delete Configuration Below This Point radio button 1
- Delete link 1
- deleting
- current rescue configuration (CLI configuration editor) 1
- current rescue configuration (J-Web) 1
- network interfaces 1
- denial-of-service attacks, preventing 1
- dense routing mode, caution for use 1
- designated router, OSPF
- controlling election 1
- description 1
- destination prefix lengths 1
- Deutsche Telekom UR-2 operating mode 1
- diagnosis
- BERT 1
- displaying CLNS VPN configurations 1
- displaying firewall filter configurations 1
- displaying firewall filter statistics 1
- displaying static routes in the routing table 1
- LDP neighbors 1
- LDP sessions 1
- LDP-signaled LSP 1
- PPP magic numbers 1
- RSVP neighbors 1
- RSVP sessions 1
- RSVP-signaled LSP 1
- traffic forwarding over LDP-signaled LSPs 1
- verifying adaptive shaper configuration 1
- verifying B-channels 1
- verifying BGP configuration 1
- verifying BGP groups 1
- verifying BGP peer reachability 1
- verifying BGP peers (neighbors) 1, 2
- verifying D-channel 1
- verifying dialer interfaces 1
- verifying firewall filter actions 1
- verifying firewall filter DoS protection 1
- verifying firewall filter flood protection 1
- verifying firewall filter handles fragments 1
- verifying firewall filters with packet logs 1
- verifying IPSec tunnel operation 1
- verifying ISDN interfaces 1
- verifying ISDN status 1
- verifying MPLS traffic engineering 1
- verifying multicast IGMP versions 1
- verifying multicast SAP and SDP configuration 1
- verifying OSPF-enabled interfaces 1
- verifying OSPF host reachability 1
- verifying OSPF neighbors 1
- verifying OSPF routes 1
- verifying PIM mode and interface configuration 1
- verifying PIM RPF routing table 1
- verifying PIM RPs 1
- verifying PPPoA for ATM-over-ADSL configuration 1
- verifying PPPoE interfaces 1
- verifying PPPoE over ATM-over-ADSL configuration 1
- verifying PPPoE sessions 1
- verifying PPPoE statistics 1
- verifying PPPoE version information 1
- verifying RIP-enabled interfaces 1
- verifying RIP host reachability 1
- verifying RIP message exchange 1
- verifying stateful firewall filters 1
- verifying virtual channel configuration 1, 2
- verifying VPN connectivity 1
- dialer filter
- applying, for dial-on-demand connectivity 1
- applying, for dial-on-demand routing 1
- for dial-on-demand connectivity 1
- for dial-on-demand routing 1
- dialer interface
- applying dialer (dial-on-demand) filter 1
- bandwidth-on-demand 1
- dialer profiles 1
- dialer watch 1
- dial-on-demand routing 1
- verifying 1
- dialer interface, ISDN
- adding 1
- limitations 1
- restrictions 1
- naming convention 1
- dialer profiles, ISDN 1
- dialer watch
- adding dialer watch interface 1
- ISDN interface 1
- overview 1
- dial-on-demand connectivity, ISDN
- dialer (dial-on-demand) filter, configuring 1
- dialer filter, applying 1
- overview 1
- dial-on-demand filter 1
- dial-on-demand routing, ISDN
- dialer (dial-on-demand) filter, applying 1
- dialer (dial-on-demand) filter, configuring 1
- overview 1
- Differentiated Services 1
- DiffServ (Differentiated Services)
- assigning forwarding classes to output queues 1
- assured forwarding 1
- BA classifiers 1
- benefits for CoS 1
- code points 1
- configuration tasks 1
- default BA classifiers 1
- default forwarding class queue assignments 1
- default scheduler settings 1
- DSCP rewrites 1
- firewall filter for a multifield classifier 1
- forwarding service classes 1
- interoperability 1
- JUNOS implementation 1
- policer for firewall filter 1
- preparation 1
- RED drop profiles 1
- rewrite rules 1
- sample BA classification 1
- scheduler maps 1
- schedulers 1
- uses 1
- virtual channels for rules 1
- Discard All Changes radio button 1
- Discard button 1
- Discard Changes Below This Point radio button 1
- discard eligibility bits 1
- discarding configuration changes 1
- discard interface 1
- discard rule
- stateful firewall filters 1
- stateless firewall filters 1
- firewall filters 1
- discovery packets, PPPoE 1, 2
- Distance Vector Multicast Routing Protocol 1
- distance-vector routing protocols 1
- dl0 1
- DLCIs (data-link connection identifiers) 1
- documentation set
- comments on 1
- domains
- broadcast domains 1
- collision domains 1
- DoS (denial-of-service) attacks, preventing 1
- dotted decimal notation 1
- downloading, configuration files (J-Web) 1
- downstream interfaces 1
- DS1 ports 1
- DS1 signals
- E1 and T1 1
- multiplexing into DS2 signal 1
- DS2 signals
- bit stuffing 1
- frame format 1
- DS3 ports 1
- DS3 signals
- DS3 C-bit parity frame format 1
- M13 frame format 1
- dsc interface 1
- DSCPs (DiffServ code points)
- corresponding forwarding service classes 1
- default forwarding class queue assignments 1
- description 1
- replacing with rewrite rules 1
- rewrites 1
- sample BA classification 1
- DSL access multiplexer (DSLAM) connection 1
- DSLAM connection
- ATM-over-ADSL interface for 1
- PPPoE over ATM-over-ADSL topology 1
- DSU (data service unit) device 1
- DTE (data terminal equipment)
- default clock rate reduction 1
- serial connection process 1
- serial device 1
- DTE clocking mode 1
- DVMRP (Distance Vector Multicast Routing Protocol) 1
- dynamic LSPs 1
- dynamic routing 1
E
- E1 interfaces 1
- E1 ports 1
- E3 interfaces 1
- E3 ports 1
- EBGP (external BGP)
- description 1
- route-flap damping 1
- sample network 1
- edit command 1
- Edit Configuration page 1
- Edit Configuration Text page 1
- Edit link 1
- EGPs (exterior gateway protocols) 1
- egress router 1
- EIA-232 1
- EIA-422 1
- EIA-449 1
- EIA-530 1
- encapsulation type 1
- encoding
- AMI 1
- B8ZS 1
- HDB3 1
- End System-to-Intermediate System 1
- EROs (Explicit Route Objects)
- loose hops 1
- strict hops 1
- error notification, in the data link layer 1
- ESF (extended superframe) framing 1
- ES-IS (End System-to-Intermediate System)
- for a PE router in a CLNS island 1
- overview 1
- Ethernet interfaces 1
- Ethernet over ATM encapsulation 1
- Ethernet over LLC encapsulation 1
- Ethernet ports 1
- ETSI operating mode 1
- EU-64 addresses 1
- exact route list match type 1
- exit command
- to navigate the configuration hierarchy 1
- to leave configuration mode 1
- exit configuration-mode command 1
- explicit clocking signal transmission 1
- Explicit Route Objects 1
- export routing policy, for Layer 2 VPNs 1
- export statement, for routing policies 1
- extended superframe (ESF) framing 1
- exterior gateway protocols 1
- external BGP 1
F
- failover connection, ISDN 1
- Fast Ethernet ports 1
- FCS (frame check sequence)
- checksums 1
- CRCs 1
- overview 1
- two-dimensional parity 1
- fe-0/0/0
- disabling PIM on 1
- management interface 1
- FEAC C-bit condition indicators 1
- FECN (forward-explicit congestion notification) bits 1
- file management
- configuration files (CLI configuration editor) 1
- configuration files (J-Web) 1
- Firewall/NAT application page 1
- Firewall/NAT page 1
- firewall filters
- applying CoS rules to logical interfaces 1
- displaying configurations 1
- displaying statistics 1
- multifield classifier filter terms 1
- overview 1
- policer for 1
- sample classifier terms 1
- stateful firewall filters 1
- stateless firewall filters 1
- term number caution 1
- verifying configuration 1
- verifying flood protection 1
- verifying fragment handling 1
- verifying packet logging 1
- flap damping 1
- flooding, preventing 1
- flow control
- data link layer 1
- actions in routing policies 1
- font conventions 1
- forward-explicit congestion notification (FECN) bits 1
- forwarding classes
- assigning to output queues 1
- default queue assignments 1
- description 1
- mapping to schedulers 1
- policy to group source and destination prefixes 1
- sample BA classification 1
- sample mappings 1
- forwarding policy options 1
- forwarding states, multicast notation 1
- forwarding table
- controlling OSPF routes in 1
- controlling static routes in 1, 2
- description 1
- MED to determine routes in 1
- FPC (PIM slot on a Services Router) 1
- frame check sequence 1
- Frame Relay encapsulation
- congestion control 1
- DLCIs 1
- overview 1
- PVCs 1
- SVCs 1
- virtual circuits 1
- Frame Relay network, typical 1
- frames
- DS2 M-frame format 1
- DS3 C-bit parity frame format 1
- DS3 M13 frame format 1
- Ethernet frame format 1
- sequencing, data link layer 1
- framing
- E1 1
- T1 1
- T3 1
- FRF.15 and FRF.16 1
- from statement, routing policy match conditions 1
- full mesh requirement
- description 1
- fulfilling with confederations 1
- fulfilling with route reflectors 1
- sample network 1
- fxp0 interface (not supported) 1
G
- gateway, local and remote, for IPSec service sets 1
- global unicast IPv6 addresses 1
- glossary
- CLNS 1
- configuration 1
- CoS 1
- firewall filters 1
- interfaces 1
- ISDN 1
- MPLS 1
- multicast 1
- ports 1
- PPPoE 1
- routing 1
- routing policies 1
- VPNs 1
- gr-0/0/0 interface 1
- gre interface 1
- groups
- BGP 1
- default junos-algs-outbound group, for stateful firewall filters 1
- OSPF areas 1
- RIP routers 1
H
- handling packet fragments 1
- HDB3 encoding 1
- HDLC (High-Level Data Link Control)
- encapsulation 1
- HDLC operational modes 1
- HDLC stations 1
- hierarchy, configuration 1
- high-density bipolar 3 code (HDB3) encoding 1
- High-Level Data Link Control 1
- history 1
- hold time, to maintain a session 1
- hop count, maximizing 1
- hostname
- for PPPoA CHAP 1
- for PPPoE CHAP 1
- host reachability
- verifying for an OSPF network 1
- verifying for a RIP network 1
- how to use this guide 1
I
- IBGP (internal BGP)
- description 1
- full mesh (configuration editor) 1
- full mesh requirement 1
- sample network 1
- sample route reflector 1
- ICMP (Internet Control Message Protocol), policers 1
- identifier link 1
- identifiers, configuration
- adding or modifying 1
- deactivating 1
- deleting 1
- inserting 1
- renaming 1
- IGMP (Internet Group Management Protocol)
- IGMPv2 1
- IGMPv3 1
- setting the version 1
- verifying the version 1
- IGMPv1 1
- IGPs (interior gateway protocols) 1
- IKE (Internet Key Exchange)
- description 1
- preshared key (configuration editor) 1
- preshared key (Quick Configuration) 1
- import routing policy, for Layer 2 VPNs 1
- import statement, for routing policies 1
- inbound router, in an LSP 1
- incoming metric (RIP)
- description 1
- modifying 1
- inet6 protocol family 1
- inet protocol family 1
- inet routing table 1
- ingress router 1
- injecting routes 1
- insert command 1
- inserting configuration identifiers 1
- Integrated Services Digital Network 1
- interface naming conventions 1
- interfaces 1
- Interfaces page 1
- interior gateway protocols 1
- Intermediate System-to-Intermediate System 1
- internal BGP 1
- Internet Control Message Protocol policers 1
- Internet Group Management Protocol 1
- Internet Key Exchange 1
- Internet routing, with BGP 1
- invalid configuration, replacing
- with J-Web 1
- with the CLI 1
- invalid routes, rejecting 1
- inverting the transmit clock 1
- ip-0/0/0 interface 1
- ip-ip interface 1
- IPSec (IP Security)
- IKE 1
- security associations 1
- tunnels 1
- verifying tunnels 1
- IPSec security associations 1
- IPSec tunnels
- IKE key (configuration editor) 1
- IKE key (Quick Configuration) 1
- IPSec rule (configuration editor) 1
- local endpoint (Quick Configuration) 1
- NAT pools (configuration editor) 1
- outgoing traffic filters 1
- overview 1
- private addresses (Quick Configuration) 1
- Quick Configuration 1
- remote endpoint (Quick Configuration) 1
- requirements 1
- services interfaces (configuration editor) 1
- services sets (configuration editor) 1
- stateful firewall filter rules(configuration editor) 1
- verifying 1
- IPSec Tunnels page 1
- IP Security 1
- IPv4 addressing
- classful addressing 1
- dotted decimal notation 1
- MAC-48 address format 1
- overview 1
- subnets 1
- VLSMs 1
- IPv6 addressing
- address format 1
- address scope 1
- address structure 1
- address types 1
- overview 1
- IPv6 support 1
- ISDN BRI interfaces 1
- ISDN connections 1
- IS-IS (Intermediate System-to-Intermediate System)
- for CLNS route exchange 1
- overview 1
- ISO protocol family 1
- ITU Annex B non-UR-2 operating mode 1
- ITU Annex B UR-2 operating mode 1
- ITU DMT BIS operating mode 1
- ITU DMT operating mode 1
J
- J-series
- BGP routing 1
- CLNS VPNs 1
- configuration tools 1
- CoS overview 1
- CoS with DiffServ 1
- firewall filter overview 1
- firewall filters 1
- interfaces overview 1
- IPSec tunnels 1
- ISDN connections 1
- MPLS for VPNs overview 1
- MPLS traffic engineering 1
- multicast 1
- multicast overview 1
- NAT 1
- network interfaces 1
- OSPF routing 1
- PPPoE 1
- release notes, URL 1
- RIP routing 1
- routing policies 1
- routing policy overview 1
- routing protocols overview 1
- static routing 1
- VPNs 1
- JTAC (Juniper Networks Technical Assistance Center) 1
- Juniper Networks Technical Assistance Center 1
- junos-algs-outbound group, for stateful firewall filters 1
- JUNOS Internet software
- CoS components 1
- CoS functions 1
- DiffServ implementation 1
- ISDN connections 1
- release notes, URL 1
- J-Web configuration editor
- BGP 1
- clickable configuration, committing 1
- clickable configuration, discarding changes 1
- clickable configuration, editing 1
- CLNS 1
- committing a text file, with caution 1
- configuration text, viewing 1
- editing a text file, with caution 1
- IPSec tunnels 1
- ISDN connections 1
- managing files 1
- MPLS traffic engineering 1
- network interfaces 1
- OSPF 1
- PPPoE 1
- PPPoE over ATM-over-ADSL 1
- RIP 1
- static routes 1
- uploading a file 1
- VPNs 1
- J-Web interface 1
K
- keepalive interval, for LDP-signaled LSPs 1
- keepalive messages, for session hold time 1
L
- Label Distribution Protocol 1
- labels, MPLS 1
- label-switched paths 1
- label switching 1
- label-switching routers (LSRs) 1
- LANs
- bridges on LAN segments 1
- collision domains 1
- repeaters on LAN segments 1
- topology 1
- Layer 2 circuits
- AS number 1
- basic, description 1
- encapsulation 1
- IGPs 1
- MPLS 1
- neighbor address 1
- participating interfaces 1
- signaling protocols 1
- task overview 1
- verifying PE router connections 1
- verifying PE router interfaces 1
- virtual circuit ID 1
- Layer 2 VPNs
- AS number 1
- basic, description 1
- BGP 1
- encapsulation 1, 2
- IGPs 1
- import routing policies 1
- MPLS 1
- overview 1
- participating interfaces 1
- routing instance 1
- signaling protocols 1
- task overview 1
- verifying PE router connections 1
- verifying PE router interfaces 1
- encapsulation 1
- export routing policies 1
- Layer 3 VPNs
- AS number 1
- basic, description 1
- BGP 1
- IGPs 1
- overview 1
- participating interfaces 1
- route target 1
- routing instance 1
- routing policies 1
- signaling protocols 1
- task overview 1
- verifying PE router connctions 1
- LCP (Link Control Protocol), connection process 1
- LDP (Label Distribution Protocol)
- and OSPF for VPNs 1
- LDP-signaled LSPs 1
- messages 1
- operation 1
- overview 1
- requirements 1
- verifying LSPs 1
- verifying neighbors 1
- verifying sessions 1
- verifying traffic forwarding 1
- LDP neighbors, verifying 1
- LDP-signaled LSP 1
- leaves 1
- line buildout
- T1 1
- T3 1
- line speed, serial interface 1
- line timing 1
- link coloring, for MPLS path selection 1
- link-local unicast IPv6 addresses 1
- link services 1
- link-state advertisements 1
- link states, verifying 1
- lo0.16385 interface 1
- lo0 interface functions 1
- load command 1
- loading a configuration file
- CLI configuration editor 1
- downloading (J-Web) 1
- rollback (J-Web) 1
- rollback command 1
- uploading (J-Web) 1
- without specifying full hierarchy 1
- load merge command 1
- load override command 1
- load patch command 1
- load replace command 1
- local preference
- description 1
- high value preferred 1
- role in route selection 1
- local tunnel endpoint, IPSec 1
- locked configuration 1
- logical interfaces
- adaptive shaping for 1
- adding (configuration editor) 1
- ATM-over-ADSL 1
- CoS rules for 1, 2
- E1 1
- E3 1
- Fast Ethernet 1
- inside services interface, IPSec 1
- outside services interface, IPSec 1
- serial 1
- T1 1
- T3 1
- virtual channels for 1
- logical units
- adding (configuration editor) 1
- E1 interface 1
- E3 interface 1
- Fast Ethernet interface 1
- number in interface name 1
- pp0 interface 1
- PPPoE encapsulation 1
- PPPoE over ATM-over-ADSL encapsulation 1
- serial interface 1
- T1 interface 1
- T3 interface 1
- long buildout 1
- longer route list match type 1
- loopback address, for PE routers in VPNs 1
- loopback interfaces
- applying stateless firewall filters to (configuration editor) 1
- functions 1
- loopback signals, E1 and T1 1
- loop clocking mode 1
- loose hops, RSVP 1
- loss priority, CoS 1
- ls-0/0/0
- adding CRTP 1
- interface description 1
- LSAs (link-state advertisements)
- description 1
- three-way handshake 1
- lsi interface 1
- LSPs (label-switched paths)
- description 1
- disabling CSPF 1
- dynamic LSPs 1
- label operations 1
- labels 1
- label switching 1
- LDP 1
- LDP-signaled LSPs 1
- LSR types 1
- overview 1
- PHP 1
- RSVP 1
- RSVP-signaled LSPs 1
- static LSPs 1
- verifying LDP-signaled LSPs 1
- verifying RSVP-signaled LSPs 1
- bandwidth 1
- for RSVP in a VPN 1
- keepalive interval for LDP link 1
- LSRs (label-switching routers) 1
- lt-0/0/0 interface 1
M
- M13 frame format 1
- MAC (media access control) 1
- MAC-48 addresses 1, 2
- MAC addresses
- EUI-64 addresses 1
- MAC-48 address format 1
- overview 1
- physical addressing 1
- magic numbers, PPP 1
- management interfaces
- overview 1
- disabling PIM on 1
- managing files 1
- manuals
- comments on 1
- mapping, CoS forwarding classes to schedulers 1
- match conditions
- routing policy 1
- routing policy, summary of 1
- stateful firewall filter and NAT 1
- stateless firewall filters 1
- stateless firewall filters, summary of 1
- match types 1
- maximum hop count, RIP 1
- maximum transmission unit 1, 2
- MED (multiple exit discriminator)
- description 1
- role in route selection 1
- media types supported 1
- merging a configuration file 1
- messages, LDP 1
- metrics 1
- MF classifier 1
- MLFR (Multilink Frame Relay) 1
- mlfr-end-to-end protocol family 1
- MLFR FRF.15 and FRF.16 1
- mlfr-uni-nni protocol family 1
- MLPPP (Multilink Point-to-Point Protocol) 1
- mlppp protocol family 1
- MPLS (Multiprotocol Label Switching) 1
- MPLS protocol family 1
- MPLS traffic engineering
- LDP-signaled LSPs 1
- LDP signaling 1
- overview 1
- requirements 1
- RSVP-signaled LSPs 1
- RSVP signaling 1
- signaling protocols overview 1
- verifying LDP neighbors 1
- verifying LDP sessions 1
- verifying LDP-signaled LSPs 1
- verifying RSVP neighbors 1
- verifying RSVP sessions 1
- verifying RSVP-signaled LSPs 1
- verifying traffic forwarding over LDP-signaled LSPs 1
- MSDP (Multicast Source Discovery Protocol) 1
- mt-0/0/0 interface 1
- MTU (maximum transmission unit)
- E1 1
- E3 1
- Fast Ethernet 1
- T1 1
- T3 1, 2
- mtun interface 1
- multiarea network, OSPF 1
- multicast
- *,G notation 1
- administrative scoping 1
- architecture 1
- Auto-RP 1
- BSR 1
- downstream interface 1
- DVMRP 1
- forwarding state notation 1
- IGMP 1
- IP address ranges 1
- MSDP 1
- network elements 1
- overview 1
- PGM 1
- PIM dense mode 1
- PIM source-specific multicast (SSM) 1
- PIM sparse mode 1
- preparation 1
- preventing routing loops 1
- protocols 1
- reverse-path forwarding (RPF) 1
- routing modes 1
- S,G notation 1
- SAP and SDP 1
- session announcements 1
- shortest-path tree (SPT) 1
- static RP 1
- subnetwork leaves and branches 1
- upstream interface 1
- verifying IGMP versions 1
- verifying PIM mode and interface configuration 1
- verifying PIM RPF routing table 1
- verifying PIM RPs 1
- verifying SAP and SDP configuration 1
- multicast IPv6 addresses 1
- multicast routing modes
- dense mode 1
- sparse mode 1
- dense mode, caution for use 1
- Multicast Source Discovery Protocol 1
- multifield classifier 1
- Multilink Frame Relay (MLFR) 1
- Multilink Frame Relay Forum 1
- Multilink Point-to-Point Protocol (MLPPP) 1
- multilink services
- CRTP 1
- MLFR 1
- MLFR FRF.15 and FRF.16 1
- MLPPP 1
- multiple exit discriminator 1
- multiple push label operation 1
- Multiprotocol Label Switching 1
N
- names, of network interfaces 1
- NAPT 1
- NAT (Network Address Translation)
- actions 1
- applying to an interface (configuration editor) 1
- configuration editor 1, 2
- description 1
- enabling (Quick Configuration) 1
- match conditions 1
- pools for IPSec tunnels (configuration editor) 1
- preparation 1
- Quick Configuration 1
- sample rules 1
- verifying 1
- NCPs (Network Control Protocols) 1
- neighbors 1
- Network Address Port Translation (NAPT) 1
- Network Address Translation 1
- Network Control Protocols (NCPs) 1
- network interfaces
- adding 1
- ATM-over-ADSL configuration 1
- ATM-over-ADSL interfaces 1
- clocking 1
- deleting 1
- DS3 configuration 1
- E1 configuration 1
- E1 interfaces 1
- E3 configuration 1
- enabling RIP on 1
- Ethernet interfaces 1
- Fast Ethernet configuration 1
- FCS 1
- IPv4 addressing 1
- IPv6 addressing 1
- ISDN interfaces 1
- logical properties 1
- media types 1
- multicast, upstream and downstream 1
- names 1
- naming conventions 1
- output, understanding 1
- physical encapsulation 1
- physical properties 1
- preparation 1
- protocol families 1
- sample name 1
- serial configuration 1
- serial interfaces 1
- supported 1
- T1 configuration 1
- T1 interfaces 1
- T3 configuration 1
- T3 interfaces 1
- verifying ATM-over-ADSL properties 1
- verifying link states 1
- verifying PIM on 1
- verifying properties 1
- verifying RIP message exchange 1
- verifying RIP on 1
- VLANs 1
- VPN configuration 1
- E3 interfaces 1
- enabling PIM on 1
- network layer reachability information (NLRI), BGP, for CLNS 1
- networks 1
- network service access points 1
- next hop
- address for static routes 1
- defining for static routes 1
- qualified, defining for static routes 1
- qualified, for static routes 1
- service set, for IPSec tunnels 1
- NLRI (network layer reachability information), BGP, for CLNS 1
- non-UR-2 operating mode 1
- Normal Response Mode, HDLC 1
- notice icons 1
- not-so-stubby areas 1
- NRM, HDLC 1
- NSAPs (network service access points)
- overview 1
- samples 1
- NSSAs (not-so-stubby areas)
- area ID (Quick Configuration) 1
- creating (configuration editor) 1
- description 1
- sample topology 1
- area ID (configuration editor) 1
- area type (Quick Configuration) 1
- example 1
- NT1 devices 1
- numeric range match conditions 1
O
- OK button
- J-Web configuration editor 1
- Quick Configuration 1
- Open Shortest Path First protocol 1
- Open Systems Interconnection (OSI) networks, CLNS VPNs 1
- operational mode, entering during configuration 1
- origin, of BGP route 1
- orlonger route list match type 1
- OSI (Open Systems Interconnection) networks, CLNS VPNs 1
- OSPF (Open Shortest Path First)
- area border routers 1
- areas 1, 2
- area type (Quick Configuration) 1
- authenticating exchanges (OSPFv2 only) 1
- backbone area 1
- controlling designated router election 1
- controlling route cost 1
- designated router 1
- dial-on-demand routing support, ISDN 1
- enabling, description 1
- enabling (Quick Configuration) 1
- ensuring efficient operation 1
- injecting OSPF routes into BGP 1
- ISDN dial-on-demand routing support 1
- LSAs 1
- multiarea network (configuration editor) 1
- NSSAs 1
- overview 1, 2
- path cost metrics 1
- Quick Configuration 1
- requirements 1
- route preferences 1
- router ID (configuration editor) 1, 2
- sample multiarea network 1
- sample network topology 1
- sample NSSAs 1
- sample single-area network 1
- sample stub areas 1
- single-area network (configuration editor) 1
- stub areas 1
- supported versions 1
- three-way handshake 1
- tuning an OSPF network 1
- verifying host reachability 1
- verifying neighbors 1
- verifying RIP-enabled interfaces 1
- verifying routes 1
- and RSVP for VPNs 1
- designating OSPF interfaces (Quick Configuration) 1
- router ID (configuration editor) 1
- router ID (Quick Configuration) 1
- and LDP for VPNs 1
- designating OSPF interfaces (configuration editor) 1, 2
- OSPF interfaces
- enabling 1
- verifying 1
- enabling, for area border routers 1
- enabling (configuration editor) 1, 2
- OSPF neighbors, verifying 1
- OSPF page 1
- outbound router, in an LSP 1
- outgoing metric (RIP)
- description 1
- modifying 1
- output queues
- assigning forwarding classes 1
- sample assignments 1
- overriding a configuration file 1,
- example 1
- 1
P
- packet encapsulation
- E1 interfaces 1
- E3 interfaces 1
- Layer 2 VPNs 1, 2
- serial interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- Layer 2 circuits 1
- packets
- applying CoS scheduling rules 1
- handling packet fragments 1
- handling packet fragments (configuration editor) 1
- PADI 1
- PADO 1
- PADR 1
- PADS 1
- PADT 1
- PPPoE discovery 1, 2
- RIP, description 1
- PADI packets 1
- PADO packets 1
- PADR packets 1
- PADS packets 1
- PADT packets 1
- parentheses, in syntax descriptions 1
- passive routes, rejection, in static routing 1
- password
- for OSPFv2 authentication 1
- for RIPv2 authentication 1
- patching a configuration file 1
- path cost metrics
- for OSPF routes, description 1, 2
- for OSPF routes, modifying 1
- for RIP routes, description 1
- for RIP routes, modifying 1
- path selection 1
- path-vector protocol 1
- pd-0/0/0 interface 1
- PE (provider edge) routers 1
- pe-0/0/0 interface 1
- peering sessions 1
- penultimate hop popping (PHP) 1
- penultimate router, in an LSP 1
- permanent routes, adding 1
- permanent virtual circuits (PVCs) 1
- PGM (Pragmatic General Multicast) 1
- PHP (penultimate hop popping) 1
- Physical Interface Module 1
- physical interface properties
- BERT 1
- encapsulation 1
- FCS 1
- interface clocking 1
- key properties 1
- PIC (PIM on a Services Router) 1
- PIM (Protocol Independent Multicast)
- disabling on the network management interface 1
- RPF routing table group 1
- source-specific multicast (SSM) 1
- sparse mode 1
- static RP router 1
- verifying the mode 1
- verifying the RP 1
- supported versions 1
- dense mode 1
- pimd interface 1
- pime interface 1
- PIMs (Physical Interface Modules)
- output about, understanding 1
- PIM number, always 0 1
- PIM slot number 1
- ping
- verifying link states 1
- VPN connection 1
- ping command 1
- Ping Host page, output for BGP 1
- ping mpls l2circuit interface command 1
- ping mpls l2circuit virtual-circuit command 1
- ping mpls l2vpn instance 1
- ping mpls l2vpn interface command 1
- ping mpls l3vpn command 1
- ping trusted-nw-trusted-host 1
- ping untrusted-nw-untrusted-host command 1
- plesiochronous networks 1
- Point-to-Point Protocol 1
- Point-to-Point Protocol over ATM 1
- Point-to-Point Protocol over Ethernet 1
- poison reverse technique 1
- polarity, signal 1
- policers
- description 1
- for firewall filter 1
- for stateless firewall filters 1
- policy 1
- pop label operation 1
- ports
- DS1 1
- DS3 1
- E1 1
- E3 1
- interfaces overview 1
- number in interface name 1
- T1 1
- T3 1
- pp0
- creating 1
- enabling CHAP 1
- information about 1
- interface description 1
- logical Ethernet interface on 1
- PPP encapsulation
- CHAP authentication 1
- CSU/DSU devices 1
- LCP connection process 1
- magic numbers 1
- NCPs 1
- overview 1
- PPPoA (Point-to-Point Protocol over ATM)
- CHAP 1
- logical encapsulation 1, 2
- verifying ATM-over-ADSL configuration 1
- logical encapsulation 1
- physical encapsulation 1
- PPPoE (Point-to-Point Protocol over Ethernet) 1
- PPPoE Active Discovery Initiation (PADI) packets 1
- PPPoE Active Discovery Offer (PADO) packets 1
- PPPoE Active Discovery Request (PADR) packets 1
- PPPoE Active Discovery Session-Confirmation (PADS) packets 1
- PPPoE Active Discovery Termination (PADT) packets 1
- PPPoE encapsulation 1
- PPPoEoA 1
- PPPoE over ATM LLC encapsulation 1
- PPPoE over ATM-over-ADSL 1
- PPP over ATM 1
- PPP over ATM AAL5 multiplex encapsulation 1
- PPP over Ethernet 1
- Pragmatic General Multicast 1
- preferences
- for OSPF routes 1
- for static routes 1
- setting for static routes 1
- prefix-length-range match type 1
- primary stations, HDLC 1
- propagation, suppressing 1
- properties, verifying
- for ATM-over-ADSL network interfaces 1
- for network interfaces 1
- protocol families
- ccc 1
- common protocol suites 1
- inet 1
- inet6 1
- ISO 1
- mlfr-end-to-end 1
- mlfr-uni-nni 1
- mlppp 1
- MPLS 1
- overview 1
- tcc 1
- tnp 1
- vpls 1
- Protocol Independent Multicast 1
- protocols
- Auto-RP 1
- BGP 1
- distance vector 1
- DVMRP 1
- EGPs 1
- EIA-530 1
- IGMP 1
- IGPs 1
- IPSec 1
- LDP 1
- MPLS 1
- MSDP 1
- multicast 1
- NAT 1
- OSPF 1
- overview 1
- path vector 1
- PGM 1
- PIM dense mode 1
- PIM source-specific multicast (SSM) 1
- PIM sparse mode 1
- PPPoE 1
- RIP 1
- RS-232 1
- RS-422/449 1
- RSVP 1
- SAP and SDP 1
- serial 1
- V.35 1
- X.21 1
- P routers 1
- provider edge routers 1
- provider routers 1
- push label operation 1
- PVCs (permanent virtual circuits) 1
Q
- queuing rules, CoS 1
- Quick Configuration
- BGP page 1
- buttons 1
- E1 Interfaces page 1
- E3 Interfaces page 1
- Fast Ethernet Interfaces page 1
- Interfaces page 1
- IPSec Tunnels page 1
- network interfaces 1
- OSPF page 1
- overview 1
- RIP page 1
- serial Interfaces page 1
- Static Routes page 1
- Summary page 1
- T1 Interfaces page 1
- T3 (DS3) Interfaces page 1
R
- radio buttons
- Delete Configuration Below This Point 1
- Discard All Changes 1
- Discard Changes Below This Point 1
- RADIUS authentication, of PPP sessions 1
- random early detection 1
- reactivate command 1
- RED (random early detection) drop profiles 1
- redistributing routes 1
- Refresh button 1
- rejecting invalid routes 1
- relative option 1
- release notes, URL 1
- Remote Authentication Dial-In User Service (RADIUS) authentication, of PPP sessions 1
- remote tunnel endpoint, IPSec 1
- rename command 1
- renaming configuration identifiers 1
- repeaters, on LAN segments 1
- replacing a configuration file 1
- request system configuration rescue delete command 1
- request system configuration rescue save command 1
- rescue configuration
- deleting (CLI configuration editor) 1
- deleting (J-Web) 1, 2
- disabling CONFIG button for 1
- loading with the CONFIG button 1, 2
- setting (CLI configuration editor) 1
- setting (J-Web) 1
- viewing (CLI configuration editor) 1
- viewing (J-Web) 1, 2
- reservation 1
- reset button, for return to factory configuration 1
- Resource Reservation Protocol 1
- reverse-path forwarding 1
- rewrite rules
- description 1
- replacing DSCPs 1
- sample rules 1
- when applied 1
- RIB 1
- RIP (Routing Information Protocol)
- authentication (RIPv2 only) 1
- authentication (RIPv2 only), configuring 1
- basic network (configuration editor) 1
- distance vector protocol 1
- efficiency techniques 1
- enabling (Quick Configuration) 1
- maximum hop count 1
- overview 1, 2
- packets 1
- path cost metrics 1
- poison reverse technique 1
- Quick Configuration 1
- requirements 1
- routing policy (configuration editor) 1
- sample network with incoming metric 1
- sample network with outgoing metric 1
- sample topology 1
- split horizon technique 1
- supported versions 1
- traffic control with metrics 1
- traffic control with metrics, configuring 1
- unidirectional limitations 1
- verifying host reachability 1
- verifying RIP-enabled interfaces 1
- verifying RIP message exchange 1
- designating RIP interfaces 1
- RIP neighbors, verifying 1
- RIP page 1
- rollback ? command 1
- rollback command 1
- rollback rescue command 1
- rolling back a configuration file
- during configuration (CLI configuration editor) 1
- during configuration (J-Web) 1
- route advertisements
- AS path in 1
- BGP, update messages 1
- description 1
- external, EBGP 1
- LSAs 1
- stub areas and NSSAs, to control 1
- internal, IBGP 1
- route aggregation 1
- route distinguishers
- description 1
- formats for 1
- route-flap damping 1
- route injection 1
- route list match types 1
- route manipulation actions, routing policies 1
- router 1
- route redistribution 1
- route reflectors 1
- route selection
- BGP, determining by AS path 1
- BGP, determining by local preference 1
- BGP, determining by MED metric 1
- BGP, lowest origin value preferred 1
- BGP process 1
- static routes, defining 1
- route target, in a VPN routing instance 1
- route targets, VPN 1
- routing 1
- Routing Engine
- handling packet fragments for (configuration editor) 1
- protecting against DoS attacks (configuration editor) 1
- protecting against untrusted services and protocols (configuration editor) 1
- routing information base 1
- Routing Information Protocol 1
- routing instance
- for CLNS static routes (with IS-IS) 1
- for CLNS static routes (without IS-IS) 1
- VPN configuration 1
- VRF instances 1
- VRF table 1
- VPN route target 1
- routing policies
- actions 1
- applying 1
- BGP export, for CLNS 1
- components 1
- configuration tasks 1
- default actions 1
- export statement 1
- final actions 1
- forwarding class with source and destination 1
- grouping source and destination prefixes 1
- import statement 1
- injecting routes from one protocol into another 1
- Layer 2 VPN export policy 1
- Layer 2 VPN import policy 1
- Layer 3 VPNs 1
- making BGP routes less preferable 1
- match conditions 1
- overview 1
- policy name 1
- preparation 1
- prepending AS paths 1
- reducing update messages with flap damping 1
- rejecting invalid routes 1
- RIP routing policy (configuration editor) 1
- route-flap damping 1
- route redistribution 1
- terms 1
- terms, creating 1
- VPN configuration 1
- BGP routing policy (configuration editor) 1
- routing protocols 1
- routing solutions
- BGP confederations, for scaling problems 1
- BGP route reflectors, for scaling problems 1
- BGP scaling techniques 1
- controlling designated router election 1
- controlling OSPF route cost 1
- controlling OSPF route selection 1
- controlling RIP traffic with the incoming metric 1
- controlling RIP traffic with the outgoing metric 1
- CoS with DiffServ 1, 2
- designated router, to reduce flooding 1
- directing BGP traffic by local preference 1
- filtering unwanted services and protocols 1
- firewall filters and NAT 1, 2
- handling packet fragments 1
- handling packet fragments (configuration editor) 1
- making BGP routes less preferable 1
- MPLS traffic engineering 1
- multicast administrative scoping 1
- multicast reverse-path forwarding (RPF) 1
- multicast shortest-path tree (SPT) 1
- NSSAs, to control route advertisement 1
- path cost metrics, for packet flow control 1
- point-to-point sessions over Ethernet 1
- poison reverse, for traffic reduction 1
- preventing multicast routing loops 1
- protecting against DoS attacks 1
- reducing update messages with flap damping 1
- rejecting invalid routes 1
- routing policies 1, 2
- securing OSPF routing (OSPFv2 only) 1
- split horizon, for traffic reduction 1
- static route control techniques 1
- stub areas, to control route advertisement 1
- VPNs 1
- routing table
- controlling static routes in 1, 2
- description 1
- displaying static routes in 1
- RPF group, for multicast 1
- sample distance-vector routing 1
- updates, limitations in RIP 1
- verifying for RPF 1
- verifying LDP-signaled LSPs 1
- verifying OSPF routes 1
- verifying RSVP-signaled LSPs 1
- RP (rendezvous point)
- static 1
- verifying 1
- RPF (reverse-path forwarding)
- description 1
- routing table group 1
- verifying the routing table 1
- RS-232 1
- RS-422/449 1
- RS-530 1
- RSVP (Resource Reservation Protocol)
- and OSPF for VPNs 1
- bandwidth reservation 1
- CSPF 1
- disabling CSPF 1
- EROs 1
- fundamentals 1
- link coloring 1
- overview 1
- requirements 1
- RSVP-signaled LSPs 1
- verifying LSPs 1
- verifying neighbors 1
- verifying sessions 1
- verifying the routing table on the entry router 1
- RSVP neighbors, verifying 1
- RSVP-signaled LSP 1
- run command 1
S
- S,G notation, for multicast forwarding states 1
- S/T interfaces
- overview 1
- PIMs 1
- samples 1, 2
- SAP (Session Announcement Protocol)
- description 1
- session announcements 1
- verifying 1
- saving, configuration files 1
- scaling BGP 1
- schedulers
- assigning resources 1
- default settings 1
- description 1
- mapping to forwarding classes 1
- sample mappings 1
- sample schedulers 1
- scheduling a commit 1
- scope, IPv6 addresses
- global unicast 1
- link-local unicast 1
- multicast types 1
- site-local unicast 1
- scoping, administrative 1
- SDP (Session Discovery Protocol)
- session announcements 1
- verifying 1
- description 1
- secondary stations, HDLC 1
- secret, CHAP 1
- security
- IPSec tunnels 1
- MD5 authentication for OSPF 1
- MD5 authentication for RIPv2 1
- password authentication for OSPFv2 1
- password authentication for RIPv2 1
- security association 1
- serial interfaces 1
- serial numbers, in MAC addresses 1
- serial ports 1
- service classes, corresponding DSCPs 1
- service sets
- for IPSec tunnels 1
- for NAT rules 1
- for stateful firewall filters 1
- services interfaces
- applying a NAT rule to (configuration editor) 1
- applying a stateful firewall filter to (configuration editor) 1
- CRTP 1
- for IPSec tunnels 1
- MLFR 1
- MLFR FRF.15 and FRF.16 1
- MLPPP 1
- overview 1
- Services Router
- as a PPPoE client 1
- BGP routing 1
- CLNS VPNs 1
- configuration tools 1
- CoS overview 1
- CoS with DiffServ 1
- CPE, with PPPoE 1
- firewall filter overview 1
- firewall filters 1
- interfaces overview 1
- IPSec tunnels 1
- ISDN connections 1
- MPLS for VPNs overview 1
- MPLS traffic engineering 1
- multicast 1
- multicast overview 1
- NAT 1
- network interfaces 1
- OSPF routing 1
- PPPoE 1
- RIP routing 1
- routing policies 1
- routing policy overview 1
- routing protocols overview 1
- static routing 1
- VPNs 1
- service types, naming for PPPoE 1
- Session Announcement Protocol 1
- sessions
- announcements, multicast 1
- BGP session establishment 1
- BGP session maintenance 1
- ISDN session establishment 1
- LDP, verifying 1
- limit on PPPoE sessions 1
- PPPoE 1, 2
- PPPoE, reconnection time 1
- RSVP, verifying 1
- shortest path first algorithm 1
- shortest-path tree 1
- show access command 1
- show bgp group command 1
- show bgp neighbor command 1
- show bgp summary command 1
- show chassis hardware command 1
- show class-of-service adaptive-shaper command 1
- show class-of-service interface command 1, 2, 3
- show class-of-service virtual-channel command 1
- show class-of-service virtual-channel-group command 1
- show cli history command 1
- show command 1, 2
- show firewall command 1
- show firewall filter protect-RE command 1, 2
- show firewall log command 1
- show igmp interface command 1
- show interfaces bc-0/0/4 extensive command 1
- show interfaces br-6/0/0 extensive command 1
- show interfaces command 1, 2
- show interfaces dc-0/0/4 extensive command 1
- show interfaces detail command 1
- show interfaces dl0 extensive command 1
- show interfaces extensive command 1
- show interfaces lo0 command 1
- show interfaces ppo command 1
- show isdn status command 1
- show ldp neighbor command 1
- show ldp session detail command 1
- show multicast rpf command 1
- show ospf interface command 1
- show ospf neighbor command 1
- show ospf route command 1
- show pim interface command 1
- show pim rps command 1
- show pppoe interfaces command 1
- show pppoe statistics command 1
- show pppoe version command 1
- show rip neighbor command 1
- show rip statistics command 1
- show route summary command 1, 2
- show route table inet.3 command 1, 2
- show route terse command 1
- show rsvp neighbor command 1
- show rsvp session detail command 1
- show sap listen command 1, 2
- show services command 1
- show services ipsec-vpn ipsec statistics command 1
- show system reboot command 1
- signaling protocols 1
- signals
- DS1 1
- E1 loopback (control) 1
- explicit clocking signal transmission 1
- multiplexing DS1 into DS2 signal 1
- serial polarity 1
- serial transmission 1
- T1 loopback (control) 1
- V.35 1
- X.21 1
- single-area network, OSPF 1
- site-local unicast IPv6 addresses 1
- source-specific multicast 1
- sp-0/0/0
- for IPSec tunnels (configuration editor) 1
- interface description 1
- no stateful firewall filters 1
- sparse mode 1
- special interfaces
- CRTP 1
- dsc interface 1
- IPv4 addressing 1
- IPv6 addressing 1
- logical properties 1
- loopback interface 1
- management interface 1
- MLFR 1
- MLFR FRF.15 and FRF.16 1
- MLPPP 1
- names 1
- naming conventions 1
- output, understanding 1
- overview 1
- physical properties 1
- protocol families 1
- services interfaces 1
- summary 1
- SPF (shortest path first) algorithm 1
- split horizon technique 1
- SPT (shortest-path tree) 1
- ssh command 1
- stateful firewall filter rules
- for IPSec tunnels (configuration editor) 1
- stateful firewall filters
- actions 1
- applying to an interface (configuration editor) 1
- automatic discard rule 1
- configuration editor 1, 2
- configuration overview 1
- description 1
- do not apply to sp-0/0/0 1
- enabling (Quick Configuration) 1
- junos-algs-outbound default group 1
- match conditions 1
- preparation 1
- Quick Configuration 1
- sample rules 1
- untrusted network 1
- verifying 1
- verifying actions 1
- stateless firewall filters
- actions and action modifiers 1
- applying to an interface (configuration editor) 1
- automatic discard rule 1, 2
- bit-field logical operators 1
- handling packet fragments 1
- handling packet fragments (configuration editor) 1
- match conditions 1
- planning 1, 2
- policers for 1
- preparation 1
- protecting the Routing Engine against ICMP floods (configuration editor) 1
- protecting the Routing Engine against TCP floods (configuration editor) 1
- protecting the Routing Engine against untrusted protocols (configuration editor) 1
- protecting the Routing Engine against untrusted services (configuration editor) 1
- sample terms, to filter fragments 1
- sample terms, to filter services and protocols 1
- sample terms, to protect against DoS attacks 1
- typical, planning 1
- description 1
- statements
- adding or modifying 1
- copying 1
- deactivating 1
- deleting 1
- replacing 1
- static LSPs 1
- static routes
- CLNS VPNs (with IS-IS) 1
- CLNS VPNs (without IS-IS) 1
- configuring basic routes (configuration editor) 1
- controlling 1
- controlling in routing and forwarding tables 1
- default properties 1
- default properties, setting 1
- defining route selection 1
- preferences 1
- preventing readvertisement 1
- qualified next hops 1
- Quick Configuration 1
- rejecting passive traffic 1
- requirements 1
- route retention 1
- sample preferred path 1
- sample stub network 1
- verifying 1
- Static Routes page 1
- static routing
- default gateway 1
- description 1
- overview 1
- static RP router 1
- statistics
- ATM-over-ADSL interfaces 1
- firewall filters 1
- IPSec tunnels 1
- PPPoE 1
- RIP 1
- status, link states, verifying 1
- status command 1
- strict hops, RSVP 1
- stub areas
- area ID (configuration editor) 1
- area type (Quick Configuration) 1
- controlling OSPF route cost 1
- creating (configuration editor) 1
- description 1
- example 1
- sample topology 1
- area ID (Quick Configuration) 1
- sub-ASs, BGP 1
- subautonomous systems, BGP 1
- subnet masks 1
- subnets 1
- subnetworks
- description 1
- IPv4 subnets 1
- multicast leaves and branches 1
- route aggregation 1
- Summary Quick Configuration page 1
- superframe framing 1
- support, technical 1
- SVCs (switched virtual circuits) 1
- swap and push label operation 1
- swap label operation 1
- switched virtual circuits (SVCs) 1
- switches, on LAN segments 1
- switch types, ISDN 1
- synchronous networks 1
- syntax conventions 1
- system clock 1
T
- T1 interfaces 1
- T1 ports 1
- T3 interfaces 1
- T3 ports 1
- tap interface 1
- tcc protocol family 1
- TCP policers 1
- technical support
- contacting JTAC 1
- TED 1
- telnet command 1
- terminology
- CLNS 1
- configuration 1
- CoS 1
- firewall filters 1
- interfaces 1
- ISDN 1
- MPLS 1
- multicast 1
- ports 1
- PPPoE 1
- routing 1
- routing policies 1
- VPNs 1
- terms
- firewall filter, for multifield classifier 1
- in a routing policy 1
- in a routing policy, creating 1
- three-way handshake 1
- through route list match type 1
- time slots
- E1 1
- number in interface name 1
- T1 1
- tnp protocol family 1
- top command 1
- topology
- data link layer 1
- IPv4 subnets 1
- PPPoE session on an ATM-over-ADSL loop 1
- PPPoE session on an Ethernet loop 1
- sample ATM-over-ADSL 1
- sample BGP AS path 1
- sample BGP confederation 1
- sample BGP confederations 1
- sample BGP external and internal links 1
- sample BGP local preference use 1
- sample BGP MED use 1
- sample BGP peer network 1
- sample BGP peer session 1
- sample BGP route reflector (one cluster) 1, 2
- sample BGP route reflectors (cluster of clusters) 1
- sample BGP route reflectors (multiple clusters) 1
- sample distance-vector routing 1
- sample Frame Relay network 1
- sample ISDN network 1
- sample LAN 1
- sample LSP network 1
- sample multiarea OSPF routing 1
- sample OSPF backbone area 1
- sample OSPF multiarea network 1
- sample OSPF network 1
- sample OSPF network with stubs and NSSAs 1
- sample OSPF single-area network 1
- sample OSPF stub areas and NSSAs 1
- sample poison reverse routing 1
- sample RIP network 1
- sample RIP network with incoming metric 1
- sample RIP network with outgoing metric 1
- sample route advertisement 1
- sample route aggregation 1
- sample router network 1
- sample RSVP-signaled LSP 1
- sample split horizon routing 1
- sample static route 1
- sample static route, preferred path 1
- sample stub network for static routes 1
- sample unidirectional routing 1
- sample VLAN 1
- sample VPN 1
- topology database, OSPF 1
- to statement, routing policy match conditions 1
- Traceroute page
- results for OSPF 1
- results for RIP 1
- traceroute source bypass-routing gateway command 1,
- explanation 1
- 1
- traffic
- controlling with incoming RIP metric 1
- controlling with outgoing RIP metric 1
- outgoing, securing 1
- traffic engineering 1
- traffic engineering database
- CSPF constraints on path selection 1
- link coloring for CSPF path selection 1
- CSPF rules for path selection 1
- transit interfaces
- LDP-signaled LSPs for 1
- RSVP-signaled LSPs for 1
- transit routers, in an LSP 1
- transmit clock source 1
- trusted networks, firewall filter protection 1
- tunnels, through a public network 1
- two-dimensional parity 1
- types of interfaces 1
U
- U interface
- overview 1
- PIMs 1
- unicast IPv6 addresses 1
- untrusted networks, firewall filter actions on 1
- up command 1
- uploading a configuration file 1
- upstream interfaces 1
- upto route list match type 1
- UR-2 operating mode 1
- URLs
- release notes 1
V
- V.35 1
- variable-length subnet masks (VLSMs) 1
- VCI (virtual channel identifier)
- ATM-over-ADSL interfaces 1
- PPPoE over ATM-over-ADSL interfaces 1
- verification
- adaptive shaping 1
- ATM-over-ADSL interface properties 1
- B-channels 1
- BGP configuration 1
- BGP groups 1
- BGP peer reachability 1
- BGP peers (neighbors) 1
- CLNS VPNs 1
- configuration syntax 1
- D-channel 1
- dialer interfaces 1
- firewall filter actions 1
- firewall filter flood protection 1
- firewall filter handles fragments 1
- firewall filter operation 1
- firewall filters 1
- firewall statistics 1
- IGMP version 1
- IPSec tunnel operation 1
- ISDN interfaces 1
- ISDN status 1
- LDP neighbors 1
- LDP sessions 1
- LDP-signaled LSP 1
- MPLS traffic engineering 1
- multicast SAP and SDP 1
- multicast session announcements 1
- network interfaces 1
- OSPF-enabled interfaces 1
- OSPF host reachability 1
- OSPF neighbors 1
- OSPF routes 1
- PIM mode and interface configuration 1
- PIM RP address 1
- PIM RPF routing table 1
- PPPoA for ATM-over-ADSL configuration 1
- PPPoE interfaces 1
- PPPoE over ATM-over-ADSL configuration 1
- PPPoE sessions 1
- PPPoE statistics 1
- PPPoE version 1
- RIP-enabled interfaces 1
- RIP host reachability 1
- RIP message exchange 1
- RSVP neighbors 1
- RSVP sessions 1
- RSVP-signaled LSP 1
- stateful firewall filters 1
- static routes in the routing table 1
- traffic forwarding over LDP-signaled LSPs 1
- virtual channel 1
- virtual channel group 1
- VPNs 1
- version
- OSPF, supported 1
- PPPoE, verifying 1
- RIP, supported 1
- View Configuration Text page 1
- virtual channel identifier 1
- virtual channels, applying CoS rules to logical interfaces 1
- virtual circuit ID, for Layer 2 circuits 1
- virtual circuits
- DLCIs 1
- overview 1
- PVCs 1
- SVCs 1
- virtual LANs 1
- virtual link, through the backbone area 1
- virtual path identifier (VPI), PPPoE over ATM-over-ADSL interfaces 1
- virtual private networks 1
- VLANs (virtual LANs)
- LAN comparison 1
- overview 1
- topology 1
- VLSMs (variable-length subnet masks) 1
- VPI, PPPoE over ATM-over-ADSL interfaces 1
- vpls protocol family 1
- VPN routing and forwarding (VRF) instances 1
- VPN routing and forwarding table 1
- VPNs (virtual private networks) 1
- VRF (VPN routing and forwarding) table 1
- VRF instances 1
X
- X.21 1