Applying the Dial-on-Demand Dialer Filter to the Dialer Interface

Navigate to the Interfaces level in the configuration hierarchy.

1. In the configuration editor hierarchy, select Configuration>View and Edit>Edit Configuration.
2. Next to Interfaces, click Edit.

From the top of the configuration editor hierarchy, enter

edit interfaces dl0 unit 0

Select the dialer interface to apply the filter—for example, dl0.0

1. In the Interface name column, click dl0.0.
2. Under Unit, in the Nested Configuration column, click Edit.

Select the dialer filter and apply it to the dialer interface.

1. In the Family section, next to Inet, click Edit.
2. Next to Filter, click Configure.
3. In the Dialer box, type int-packet, the dialer-filter configured in Configuring a Dialer Filter, as the dialer-filter.
4. Click OK.

1. Enter

   edit family inet filter

2. Enter

   set dialer int-packet