Removing a PIM Cable

To remove a PIM cable:

1. If you are removing all cables connected to the PIM, issue the following CLI command to take the PIM offline:
   user@host> request chassis pic fpc-slot fpc-slot pic-slot pim-slot offline

   For example, to take the PIM in slot 4 offline, enter the following command:

   
   user@host> request chassis pic fpc-slot 4 pic-slot 0 offline

   For more information about the command, see the JUNOS Protocols, Class of Service, and System Basics Command Reference.

2. Unplug the cable from the cable connector port.
3. Detach the cable from the destination port.