[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the Policy Name (Required)

Each routing policy is identified by a policy name. The name can contain letters, numbers, and hyphens (-) and can be up to 255 characters long. To include spaces in the name, enclose the entire name in double quotation marks.

Each routing policy name must be unique within a configuration.

To configure the policy name:

Navigate to the top of the configuration hierarchy in either the J-Web or CLI configuration editor.
Perform the configuration tasks described in Table 101.
Go on to Configuring a Policy Term (Required).

Table 101: Configuring the Policy Name

Task	J-Web Configuration Editor	CLI Configuration Editor
Navigate to the Policy statement level in the configuration hierarchy.	In the J-Web configuration editor hierarchy, select Policy options>Policy statement.	From the top of the CLI configuration hierarchy, enter edit policy-options
Enter the policy name.	In the Policy name box, type the name of the policy.	Type the policy-name value. For example: set policy-statement policy1
Apply your configuration changes.	Click OK to apply your entries to the configuration.	Changes in the CLI are applied automatically when you execute the set command.

Task

J-Web Configuration Editor

CLI Configuration Editor

Navigate to the Policy statement level in the configuration hierarchy.

In the J-Web configuration editor hierarchy, select Policy options>Policy statement.

From the top of the CLI configuration hierarchy, enter

edit policy-options

Enter the policy name.

In the Policy name box, type the name of the policy.

Type the policy-name value. For example:

set policy-statement policy1

Apply your configuration changes.

Click OK to apply your entries to the configuration.

Changes in the CLI are applied automatically when you execute the set command.

[Contents] [Prev] [Next] [Index] [Report an Error]