Configuring Network Interfaces with Quick Configuration

The Quick Configuration page allows you to configure network interfaces on a Services Router, as shown in Figure 11.

To configure a network interface with Quick Configuration:

1. In the J-Web user interface, select Configuration>Quick Configuration>Interfaces. You can select Interfaces in the list under Router Configuration or from the left pane.

   A list of the network interfaces present on the Services Router is displayed, as shown in Figure 11. The third column indicates whether the interface has been configured.

2. To configure properties for a network interface, select the interface name and proceed with configuration as described in one of the following topics:

• Configuring an E1 Interface with Quick Configuration
• Configuring a Fast Ethernet Interface with Quick Configuration
• Configuring a T1 Interface with Quick Configuration
• Configuring a T3 Interface with Quick Configuration
• Configuring a Serial Interface with Quick Configuration