[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Routing Options for VPNs

The only required routing option for VPNs is the autonomous system (AS) number. You must specify it on each router involved in the VPN.

To configure routing options for a VPN:

  1. Navigate to the top of the configuration hierarchy in either the J-Web or CLI configuration editor.
  2. Perform the configuration task described in Table 67.
  3. When you have finished configuring the network, commit the configuration.
  4. To verify the configuration, see Verifying a VPN Configuration
  5. Go on to Configuring an IGP and a Signaling Protocol.

Table 67: Configuring Routing Options for a VPN

Task

J-Web Configuration Editor

CLI Configuration Editor

Configure the AS number.
  1. In the configuration editor hierarchy, click Routing Options.
  2. In the AS number box, type the AS number.
  3. Click OK.

From the top of the configuration hierarchy, enter

set routing-options autonomous-system as-number

[Contents] [Prev] [Next] [Index] [Report an Error]

[an error occurred while processing this directive]