Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show route flow validation

Syntax

Syntax (EX Series Switches)

Description

Display flow route information.

Options

none

Display flow route information.

brief | detail

(Optional) Display the specified level of output. If you do not specify a level of output, the system defaults to brief.

ip-prefix

(Optional) IP address for the flow route.

logical-system (all | logical-system-name)

(Optional) Perform this operation on all logical systems or on a particular logical system.

table table-name

(Optional) Display flow route information for all routing tables whose name begins with this string (for example, inet.0 and inet6.0 are both displayed when you run the show route flow validation inet command).

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show route flow validation command. Output fields are listed in the approximate order in which they appear.

Table 1: show route flow validation Output Fields

Field Name

Field Description

Level of Output

routing-table-name

Name of the routing table (for example, inet.0).

All levels

prefix

Route address.

All levels

Active unicast route

Active route in the routing table.

All levels

Dependent flow destinations

Number of flows for which there are routes in the routing table.

All levels

Origin

Source of the route flow.

All levels

Neighbor AS

Autonomous system identifier of the neighbor.

All levels

Flow destination

Number of entries and number of destinations that match the route flow.

All levels

Unicast best match

Destination that is the best match for the route flow.

All levels

Flags

Information about the route flow.

All levels

Sample Output

show route flow validation

show route flow validation (IPv6)

Release Information

Command introduced before Junos OS Release 7.4.