show oam ethernet connectivity-fault-management mep-statistics
Syntax
show oam ethernet connectivity-fault-management mep-statistics
maintenance-domain md-name
maintenance-association ma-name
<mep mep-id>
<remote-mep remote-mep-id>
<count entry-count>
Description
On MX Series and ACX Series routers and EX Series switches with Ethernet interfaces, display ETH-DM statistics and ETH-DM frame counts.
For Ethernet interfaces on MX Series routers, display any ITU-T Y.1731 synthetic frame loss measurement (ETH-SLM) statistics and frame counts.
Options
| maintenance-domain md-name | Name of an existing CFM maintenance domain. |
| maintenance-association ma-name | Name of an existing CFM maintenance association. |
| mep mep-id | (Optional) Numeric identifier of the local MEP. The range of values is 1 through 8192. On EX Series switches, the range of values is 1 through 8191. |
| remote-mep remote-mep-id | (Optional) Numeric identifier of the remote MEP. The range of values is 1 through 8192. On EX Series switches, the range of values is 1 through 8191. |
| count entry-count | (Optional) Number of entries to display from the statistics table. The range of values is 1 through 100. The default value is 100 entries. |
Required Privilege Level
view
Output Fields
Table 1 lists the output fields for the show oam ethernet connectivity-fault-management
mep-statistics command. Output fields are listed in the approximate
order in which they appear.
Output Field Name |
Field Description |
|---|---|
MEP identifier |
Maintenance association end point (MEP) numeric identifier. |
MAC address |
Unicast MAC address configured for the MEP. |
Remote MEP count |
Number of remote MEPs (unless you specify the remote-mep option). |
|
Number of continuity check messages (CCMs) sent. |
|
Number of continuity check messages (CCMs) received for a specific remote MEP and maintenance association. |
|
Number of continuity check messages (CCMs) received that were not in sequence. |
Remote MEP identifier |
Numeric identifier of the remote MEP. |
Remote MAC address |
Unicast MAC address of the remote MEP. |
Index |
Index number that corresponds to the ETH-DM entry in the CFM database. |
One-way delay (usec) |
For a one-way ETH-DM session, the frame delay time, in microseconds, measured at the receiver MEP. For a detailed description of one-way Ethernet frame delay measurement, see the ITU-T Y.1731 Ethernet Service OAM topics in the Junos OS Network Interfaces Library for Routing Devices. |
Two-way delay (usec) |
For a two-way ETH-DM session, the frame delay time, in microseconds, measured at the initiator MEP. For a detailed description of two-way Ethernet frame delay measurement, see the ITU-T Y.1731 Ethernet Service OAM topics in the Junos OS Network Interfaces Library for Routing Devices. |
Average one-way delay |
Average one-way frame delay for the statistics displayed. |
Average one-way delay variation |
Average one-way “frame jitter” for the statistics displayed. |
Best-case one-way delay |
Lowest one-way frame delay for the statistics displayed. |
Worst-case one-way delay |
Highest one-way frame delay for the statistics displayed. |
Average two-way delay |
Average two-way frame delay for the statistics displayed. |
Average two-way delay variation |
Average two-way “frame jitter” for the statistics displayed. |
Best-case two-way delay |
Lowest two-way frame delay for the statistics displayed. |
Worst-case two-way delay |
Highest two-way frame delay calculated in this session. |
|
Total number of synthetic loss message (SLM) PDU frames sent from the source MEP to the remote MEP during this ETH-SLM session. |
|
Total number of synthetic loss message (SLM) PDU frames that the remote MEP received from the source MEP during this ETH-SLM session. |
|
Total number of synthetic loss reply (SLR) PDU frames that the remote MEP sent to the source MEP during this measurement session. |
|
Total number of synthetic loss reply (SLR) PDU frames that the source MEP received from the remote MEP during this measurement session. |
|
Number of synthetic frames transmitted to the peer MEP for a test ID. A test ID is used to distinguish each synthetic loss measurement because multiple measurements can be simultaneously activated also on a given CoS and MEP pair. It must be unique at least within the context of any SLM for the MEG and initiating MEP. |
|
Number of synthetic frames received from the peer MEP for a test ID. The MEP generates a unique Test ID for the session, adds the source MEP ID, and initializes the local counters for the session before SLM initiation. For each SLM PDU transmitted for the session (test ID), the local counter TXFC1 is sent in the packet. |
|
Value of the local counter TxFCl at the time of SLM frame transmission. |
|
Value of the local counter RxFCl at the time of SLR frame transmission. |
|
Count of frame loss associated with ingress data frames. |
|
Count of frame loss associated with egress data frames. |
Sample Output
- show oam ethernet connectivity-fault- management mep-statistics (CIR counters only)
- show oam ethernet connectivity-fault- management mep-statistics (CIR and EIR counters enabled)
- show oam ethernet connectivity-fault- management mep-statistics remote-mep (CIR counters only)
- show oam ethernet connectivity-fault- management mep-statistics remote-mep (CIR and EIR counters enabled)
- show oam ethernet connectivity-fault- management mep-statistics
- show oam ethernet connectivity-fault-management mep-statistics remote-mep
- show oam ethernet connectivity-fault-management mep-statistics local-mep remote-mep
show oam ethernet connectivity-fault- management mep-statistics (CIR counters only)
user@host> show oam ethernet connectivity-fault-management mep-statistics maintenance-domain md1 maintenance-association ma-1 local-mep 3 remote-mep 103 count 3
MEP identifier: 100, MAC address: 00:05:85:73:7b:39
Remote MEP count : 1
CCMs sent : 6550
CCMs received out of sequence : 0
LBMs sent : 0
Valid in-order LBRs received : 0
Valid out-of-order LBRs received : 0
LBRs received with corrupted data : 0
LBRs sent : 0
LTMs sent : 0
LTMs received : 0
LTRs sent : 0
LTRs received : 0
Sequence number of next LTM request : 0
1DMs sent : 5
Valid 1DMs received : 0
Invalid 1DMs received : 0
DMMs sent : 5
DMRs sent : 0
Valid DMRs received : 5
Invalid DMRs received : 0
LMM sent : 5
Valid LMM received : 5
Invalid LMM received : 0
LMR sent : 0
Valid LMR received : 5
Invalid LMR received : 0
Remote MEP identifier : 101
Remote MAC address : 00:05:85:73:39:4a
Delay measurement statistics:
Index One-way delay Two-way delay
(usec) (usec)
1 259 519
2 273 550
3 287 571
4 299 610
5 313 650
Average one-way delay : 286 usec
Average one-way delay variation : 62 usec
Best case one-way delay : 259 usec
Average two-way delay : 580 usec
Average two-way delay variation : 26 usec
Best case two-way delay : 519 usec
Worst case two-way delay : 650 usec
Loss measurement statistics:
Index Near-end Far-end Near-end Far-end
Frame loss Frame loss Frame loss Frame loss
(CIR) (CIR) (EIR) (EIR)
1 9 9
2 3 5
3 7 5
4 9 6
5 3 6
Average near-end loss (CIR) : 6.2
Average near-end loss ratio (CIR) : 6.2%
Average far-end loss (CIR) : 6.2
Average far-end loss ratio (CIR) : 6.2%
Near-end best case loss (CIR) : 3
Near-end best case loss ratio (CIR) : 3%
Near-end worst case loss (CIR) : 9
Near-end worst case loss ratio (CIR) : 9%
Far-end best case loss (CIR) : 5
Far-end best case loss ratio (CIR) : 5%
Far-end worst case loss (CIR) : 9
Far-end worst case loss ratio (CIR) : 9%show oam ethernet connectivity-fault- management mep-statistics (CIR and EIR counters enabled)
user@host> show oam ethernet connectivity-fault-management mep-statistics maintenance-domain md1 maintenance-association ma-1 local-mep 3 remote-mep 103 count 3
MEP identifier: 100, MAC address: 00:05:85:73:7b:39
Remote MEP count : 1
CCMs sent : 6550
CCMs received out of sequence : 0
LBMs sent : 0
Valid in-order LBRs received : 0
Valid out-of-order LBRs received : 0
LBRs received with corrupted data : 0
LBRs sent : 0
LTMs sent : 0
LTMs received : 0
LTRs sent : 0
LTRs received : 0
Sequence number of next LTM request : 0
1DMs sent : 5
Valid 1DMs received : 0
Invalid 1DMs received : 0
DMMs sent : 5
DMRs sent : 0
Valid DMRs received : 5
Invalid DMRs received : 0
LMM sent : 5
alid LMM received : 5
Invalid LMM received : 0
LMR sent : 0
Valid LMR received : 5
Invalid LMR received : 0
Remote MEP identifier : 101
Remote MAC address : 00:05:85:73:39:4a
Delay measurement statistics:
Index One-way delay Two-way delay
(usec) (usec)
1 259 519
2 273 550
3 287 571
4 299 610
5 313 650
Average one-way delay : 286 usec
Average one-way delay variation : 62 usec
Best case one-way delay : 259 usec
Average two-way delay : 580 usec
Average two-way delay variation : 26 usec
Best case two-way delay : 519 usec
Worst case two-way delay : 650 usec
Loss measurement statistics:
Index Near-end Far-end Near-end Far-end
Frame loss Frame loss Frame loss Frame loss
(CIR) (CIR) (EIR) (EIR)
1 9 9 2 4
2 3 5 4 6
3 7 5 0 2
4 9 6 8 2
5 3 6 6 4
Average near-end loss (CIR) : 6.2
Average near-end loss ratio (CIR) : 6.2%
Average far-end loss (CIR) : 6.2
Average far-end loss ratio (CIR) : 6.2%
Near-end best case loss (CIR) : 3
Near-end best case loss ratio (CIR) : 3%
Near-end worst case loss (CIR) : 9
Near-end worst case loss ratio (CIR) : 9%
Far-end best case loss (CIR) : 5
Far-end best case loss ratio (CIR) : 5%
Far-end worst case loss (CIR) : 9
Far-end worst case loss ratio (CIR) : 9%
Average near-end loss (EIR) : 4
Average near-end loss ratio (EIR) : 4%
Average far-end loss (EIR) : 3.4
Average far-end loss ratio (EIR) : 3.4%
Near-end best case loss (EIR) : 0
Near-end best case loss ratio (EIR) : 0%
Near-end worst case loss (EIR) : 8
Near-end worst case loss ratio (EIR) : 8%
Far-end best case loss (EIR) : 2
Far-end best case loss ratio (EIR) : 2%
Far-end worst case loss (EIR) : 6
Far-end worst case loss ratio (EIR) : 6%show oam ethernet connectivity-fault- management mep-statistics remote-mep (CIR counters only)
user@host> show oam ethernet connectivity-fault-management mep-statistics maintenance-domain md1 maintenance-association ma-1 local-mep 3 remote-mep 103 count 3 remote-mep 101
MEP identifier: 100, MAC address: 00:05:85:73:7b:39
CCMs sent : 7762
CCMs received out of sequence : 0
LBMs sent : 0
Valid in-order LBRs received : 0
Valid out-of-order LBRs received : 0
LBRs received with corrupted data : 0
LBRs sent : 0
LTMs sent : 0
LTMs received : 0
LTRs sent : 0
LTRs received : 0
Sequence number of next LTM request : 0
1DMs sent : 5
Valid 1DMs received : 0
Invalid 1DMs received : 0
DMMs sent : 5
DMRs sent : 0
Valid DMRs received : 5
Invalid DMRs received : 0
LMM sent : 5
Valid LMM received : 5
Invalid LMM received : 0
LMR sent : 0
Valid LMR received : 5
Invalid LMR received : 0
Remote MEP identifier : 101
Remote MAC address : 00:05:85:73:39:4a
Delay measurement statistics:
Index One-way delay Two-way delay
(usec) (usec)
1 259 519
2 273 550
3 287 571
4 299 610
5 313 650
Average one-way delay : 286 usec
Average one-way delay variation : 62 usec
Best case one-way delay : 259 usec
Average two-way delay : 580 usec
Average two-way delay variation : 26 usec
Best case two-way delay : 519 usec
Worst case two-way delay : 650 usec
Loss measurement statistics:
Index Near-end Far-end Near-end Far-end
Frame loss Frame loss Frame loss Frame loss
(CIR) (CIR) (EIR) (EIR)
1 9 9
2 3 5
3 7 5
4 9 6
5 3 6
Average near-end loss (CIR) : 6.2
Average near-end loss ratio (CIR) : 6.2%
Average far-end loss (CIR) : 6.2
Average far-end loss ratio (CIR) : 6.2%
Near-end best case loss (CIR) : 3
Near-end best case loss ratio (CIR) : 3%
Near-end worst case loss (CIR) : 9
Near-end worst case loss ratio (CIR) : 9%
Far-end best case loss (CIR) : 5
Far-end best case loss ratio (CIR) : 5%
Far-end worst case loss (CIR) : 9
Far-end worst case loss ratio (CIR) : 9%
Average near-end loss (EIR) : 4
Average near-end loss ratio (EIR) : 4%
Average far-end loss (EIR) : 3.4
Average far-end loss ratio (EIR) : 3.4%
Near-end best case loss (EIR) : 0
Near-end best case loss ratio (EIR) : 0%
Near-end worst case loss (EIR) : 8
Near-end worst case loss ratio (EIR) : 8%
Far-end best case loss (EIR) : 2
Far-end best case loss ratio (EIR) : 2%
Far-end worst case loss (EIR) : 6
Far-end worst case loss ratio (EIR) : 6%show oam ethernet connectivity-fault- management mep-statistics remote-mep (CIR and EIR counters enabled)
user@host> show oam ethernet connectivity-fault-management mep-statistics maintenance-domain md1 maintenance-association ma-1 local-mep 3 remote-mep 103 count 3 remote-mep 101
MEP identifier: 100, MAC address: 00:05:85:73:7b:39
CCMs sent :7762
CCMs received out of sequence : 0
LBMs sent : 0
Valid in-order LBRs received : 0
Valid out-of-order LBRs received : 0
LBRs received with corrupted data : 0
LBRs sent : 0
LTMs sent : 0
LTMs received : 0
LTRs sent : 0
LTRs received : 0
Sequence number of next LTM request : 0
1DMs sent : 5
Valid 1DMs received : 0
Invalid 1DMs received : 0
DMMs sent : 5
DMRs sent : 0
Valid DMRs received : 5
Invalid DMRs received : 0
LMM sent : 5
Valid LMM received : 5
Invalid LMM received : 0
LMR sent : 0
Valid LMR received : 5
Invalid LMR received : 0
Remote MEP identifier : 101
Remote MAC address : 00:05:85:73:39:4a
Delay measurement statistics:
Index One-way delay Two-way delay
(usec) (usec)
1 259 519
2 273 550
3 287 571
4 299 610
5 313 650
Average one-way delay : 286 usec
Average one-way delay variation : 62 usec
Best case one-way delay : 259 usec
Average two-way delay : 580 usec
Average two-way delay variation : 26 usec
Best case two-way delay : 519 usec
Worst case two-way delay : 650 usec
Loss measurement statistics:
Index Near-end Far-end Near-end Far-end
Frame loss Frame loss Frame loss Frame loss
(CIR) (CIR) (EIR) (EIR)
1 10 8 5 12
2 12 7 6 16
3 7 5 0 2
4 9 6 8 2
5 3 6 6 4
Average near-end loss (CIR) : 6.2
Average near-end loss ratio (CIR) : 6.2%
Average far-end loss (CIR) : 6.2
Average far-end loss ratio (CIR) : 6.2%
Near-end best case loss (CIR) : 3
Near-end best case loss ratio (CIR) : 3%
Near-end worst case loss (CIR) : 9
Near-end worst case loss ratio (CIR) : 9%
Far-end best case loss (CIR) : 5
Far-end best case loss ratio (CIR) : 5%
Far-end worst case loss (CIR) : 9
Far-end worst case loss ratio (CIR) : 9%
Average near-end loss (EIR) : 4
Average near-end loss ratio (EIR) : 4%
Average far-end loss (EIR) : 3.4
Average far-end loss ratio (EIR) : 3.4%
Near-end best case loss (EIR) : 0
Near-end best case loss ratio (EIR) : 0%
Near-end worst case loss (EIR) : 8
Near-end worst case loss ratio (EIR) : 8%
Far-end best case loss (EIR) : 2
Far-end best case loss ratio (EIR) : 2%
Far-end worst case loss (EIR) : 6
Far-end worst case loss ratio (EIR) : 6%show oam ethernet connectivity-fault- management mep-statistics
user@host> show oam ethernet connectivity-fault-management mep-statistics maintenance-domain md1 maintenance-association ma-1
MEP identifier: 100, MAC address: 00:05:85:73:7b:39
Remote MEP count: 1
CCMs sent : 6550
CCMs received out of sequence : 0
LBMs sent : 0
Valid in-order LBRs received : 0
Valid out-of-order LBRs received : 0
LBRs received with corrupted data : 0
LBRs sent : 0
LTMs sent : 0
LTMs received : 0
LTRs sent : 0
LTRs received : 0
Sequence number of next LTM request : 0
1DMs sent : 5
Valid 1DMs received : 0
Invalid 1DMs received : 0
DMMs sent : 5
DMRs sent : 0
Valid DMRs received : 5
Invalid DMRs received : 0
SLM sent : 10
Valid SLM received : 20
Invalid SLM received : 0
SLR sent : 20
Valid SLR received : 10
Invalid SLR received : 0
Remote MEP identifier: 101
Remote MAC address: 00:05:85:73:39:4a
Delay measurement statistics:
Index One-way delay Two-way delay
(usec) (usec)
1 259 519
2 273 550
3 287 571
4 299 610
5 313 650
Average one-way delay : 286 usec
Average one-way delay variation: 62 usec
Best case one-way delay : 259 usec
Worst case one-way delay : 313 usec
Average two-way delay : 580 usec
Average two-way delay variation: 26 usec
Best case two-way delay : 519 usec
Worst case two-way delay : 650 usec Synthetic Loss measurement statistics:
SLM packets sent : 100
SLM packets received : 0
SLR packets sent : 100
SLR packets received : 0
Accumulated SLM statistics:
Local TXFC1 value : 100
Local RXFC1 value : 100
Last Received SLR frame TXFCftc : 100
Last Received SLR frame TXFCbtc : 100
SLM Frame Loss:
Frame Loss (far-end) : 0 (0.00 %)
Frame Loss (near-end) : 0 (0.00 %)
show oam ethernet connectivity-fault-management mep-statistics remote-mep
user@host> show oam ethernet connectivity-fault-management mep-statistics maintenance-domain md1 maintenance-association ma1 remote-mep 101
MEP identifier: 100, MAC address: 00:05:85:73:7b:39
CCMs sent : 7762
CCMs received out of sequence : 0
LBMs sent : 0
Valid in-order LBRs received : 0
Valid out-of-order LBRs received : 0
LBRs received with corrupted data : 0
LBRs sent : 0
LTMs sent : 0
LTMs received : 0
LTRs sent : 0
LTRs received : 0
Sequence number of next LTM request : 0
1DMs sent : 5
Valid 1DMs received : 0
Invalid 1DMs received : 0
DMMs sent : 5
DMRs sent : 0
Valid DMRs received : 5
Invalid DMRs received : 0
SLM sent : 10
Valid SLM received : 20
Invalid SLM received : 0
SLR sent : 20
Valid SLR received : 10
Invalid SLR received : 0
Remote MEP identifier: 101
Remote MAC address: 00:05:85:73:39:4a
Delay measurement statistics:
Index One-way delay Two-way delay
(usec) (usec)
1 259 519
2 273 550
3 287 571
4 299 610
5 313 650
Average one-way delay : 286 usec
Average one-way delay variation: 62 usec
Best case one-way delay : 259 usec
Worst case one-way delay : 313 usec
Average two-way delay : 580 usec
Average two-way delay variation: 26 usec
Best case two-way delay : 519 usec
Worst case two-way delay : 650 usec Synthetic Loss measurement statistics:
SLM packets sent : 100
SLM packets received : 0
SLR packets sent : 100
SLR packets received : 0
Accumulated SLM statistics:
Local TXFC1 value : 100
Local RXFC1 value : 100
Last Received SLR frame TXFCftc : 100
Last Received SLR frame TXFCbtc : 100
SLM Frame Loss:
Frame Loss (far-end) : 0 (0.00 %)
Frame Loss (near-end) : 0 (0.00 %)
show oam ethernet connectivity-fault-management mep-statistics local-mep remote-mep
user@host> show oam ethernet connectivity-fault-management mep-statistics maintenance-domain md1 maintenance-association ma1 local-mep 121 remote-mep 101 MEP identifier: 1, MAC address: 3c:61:04:25:fa:95 Remote MEP count: 1 CCMs sent : 875 CCMs Received : 300 CCMs received out of sequence : 0 LBMs sent : 0 Valid in-order LBRs received : 0 Valid out-of-order LBRs received : 0 LBRs received with corrupted data : 0 LBRs sent : 0 LTMs sent : 0 LTMs received : 0 LTRs sent : 0 LTRs received : 0 Sequence number of next LTM request : 12 1DMs sent : 0 Valid 1DMs received : 0 Invalid 1DMs received : 0 Out of sync 1DMs received : 0 DMMs sent : 0 Valid DMMs received : 0 Invalid DMMs received : 0 DMRs sent : 0 Valid DMRs received : 0 Invalid DMRs received : 0 LMMs sent : 0 Valid LMMs received : 0 Invalid LMMs received : 0 LMRs sent : 0 Valid LMRs received : 0 Invalid LMRs received : 0 SLMs sent : 0 Valid SLMs received : 0 Invalid SLMs received : 0 SLRs sent : 0 Valid SLRs received : 0 Invalid SLRs received : 0 Valid AISs generated : 0 Valid AISs received : 0
Release Information
Command introduced in Junos OS Release 9.5.
Support for ITU-T Y.1731 Ethernet synthetic frame loss measurement (ETH-SLM) added in Junos OS Release 13.2 for MX Series routers.