aggregated-ether-options
Syntax (EX, MX Series)
aggregated-ether-options { ethernet-switch-profile { tag-protocol-id; } (flow-control | no-flow-control); lacp { (active | passive); admin-key key; periodic interval; system-id mac-address; } (link-protection | no-link-protection); link-speed speed; local-bias; logical-interface-fpc-redundancy; (loopback | no-loopback); mc-ae { chassis-id chassis-id; enhanced-convergence; events { iccp-peer-down { force-icl-down; prefer-status-control-active; } } init-delay-time seconds; mc-ae-id mc-ae-id; mode (active-active | active-standby); recovery-delay-time seconds; redundancy-group group-id; revert-time revert-time; status-control (active | standby); switchover-mode (non-revertive | revertive); } minimum-links number; system-priority }
Syntax (NFX, QFX Series, EX4600, OCX1100, QFabric)
The fcoe-lag
and mc-ae
statements are
not supported on OCX Series switches.
aggregated-ether-options { configured-flow-control { rx-buffers (on | off); tx-buffers (on | off); } ethernet-switch-profile { tag-protocol-id; (fcoe-lag | no-fcoe-lag); (flow-control | no-flow-control); lacp mode { admin-key key; periodic interval; system-id mac-address; force-up; } } (link-protection | no-link-protection); link-speed speed; local-bias; local-minimum-links-threshold threshold-value; (loopback | no-loopback); mc-ae { chassis-id chassis-id; enhanced-convergence; events { iccp-peer-down { force-icl-down; prefer-status-control-active; } } init-delay-time seconds; mc-ae-id mc-ae-id; mode (active-active); recovery-delay-time seconds; redundancy-group group-id; revert-time revert-time; status-control (active | standby); switchover-mode (non-revertive | revertive); } minimum-links number; rebalance-periodic; resilient-hash; source-address-filter filter; (source-filtering | no-source-filtering); }
Hierarchy Level (EX Series, QFX Series)
[edit interfaces aex]
Description
Configure the aggregated Ethernet properties of a specific aggregated Ethernet interface.
The
fcoe-lag
andmc-ae
statements are not supported on OCX Series switches.The
force-up
statement is not supported on QFX10002 switches.The
resilient-hash
statement is not supported on QFX5200, QFX5210, or QFX10002 switches.On QFX switches, the
enhanced-convergence
statement is supported on QFX10000 line of switches andrecovery-delay-time
statement is supported on QFX5000 and QFX10000 line of switches.
The remaining statements are explained separately. See CLI Explorer.
Default
Options are not enabled.
Required Privilege Level
interface—To view this statement in the configuration.interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 9.0.
Statements fcoe-lag
and no-fcoe-lag
introduced
in Junos OS Release 13.2X52-D10 for the QFX Series.
Statements force-up
, lacp
, and resilient-hash
introduced in Junos OS Release 14.1X53-D10 for the QFX Series.
Statement local-minimum-links-threshold
introduced
in Junos OS Release 14.1X53-D40 for the QFX Series.