splitting-merging

Number of label-switched paths (LSPs) that a container LSP can have as member LSPs at maximum.

• Default: 1

Amount of bandwidth in bits per second (bps) that can be signaled for an LSP at maximum after normalization. When maximum-signaling-bandwidth is not configured, the value is derived from the splitting-bandwidth.

When auto-bandwidth adjustment is done between two normalization events, per LSP auto-bandwidth configuration and thresholds are used instead of the splitting-bandwidth.

• Default: 1 bps

Amount of bandwidth in bits per second (bps) that is used for merging during normalization.

• Default: 1 bps

Number of LSPd that a container LSP can have as member LSPs at minimum.

• Default: 64

Amount of bandwidth in bits per second (bps) that can be signaled for an LSP at minimum after normalization. When minimum-signaling-bandwidth is not configured, the value is derived from the merging-bandwidth.

When auto-bandwidth adjustment is done between two normalization events, per LSP auto-bandwidth configuration and thresholds are used instead of the merging-bandwidth.

• Default: 1 bps

Amount of bandwidth in bits per second (bps) that can be used for splitting during normalization.

• Default: 1 bps

Percentage changes in aggregate bandwidth relevant for splitting and merging.

• Default: 0%

Do not normalize when we are not splitting or merging member LSPs .

If normalization does not need to create or delete any member LSPs, we re-signal the member LSPs with equal bandwidth. Enabling no-normalize-same-members statement, we avoid such normalizations. .