Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

p2mp (Protocols LDP)

Syntax

Hierarchy Level

Description

Enable point-to-multipoint MPLS LSPs in an LDP-signaled LSP.

Options

no-rsvp-tunneling

(Optional) Disable LDP point-to-multipoint LSPs from using RSVP-TE LSPs for tunneling, and use LDP paths instead.

Note:

The no-rsvp-tunneling option is introduced in Junos OS Release 16.1R5, 17.3R1, 17.2R2, 16.2R3, and later releases.

Starting in Junos OS Release 12.3R1, Junos OS provides support for Multipoint LDP (M-LDP) for Targeted LDP (T-LDP) sessions with unicast replication, in addition to link sessions. As a result, the default behavior of M-LDP over RSVP tunneling is similar to unicast LDP. However, because T-LDP is chosen over LDP and link sessions to signal point-to-multipoint LSPs, the no-rsvp-tunelling option enables LDP natively throughout the network.

recursive

(Optional) Configure point-to-multipoint recursive parameters, including route.

route

(Optional) Allow recursive route resolution to signal point-to-multipoint Forwarding Equivalence Class (FEC).

fec

(Optional) Allow recursive opaque value to signal P2MP FEC.

root-address root-address

(Optional) Specify the root address of the point-to-multipoint LSP.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 11.2.

no-rsvp-tunneling option added in Junos OS Release 16.1R5.

fec option added in Junos OS and Junos OS Evolved Release 23.4R1.