in-place-lsp-bandwidth-update (Protocols MPLS)
Syntax
in-place-lsp-bandwidth-update;
Hierarchy Level
[edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name], [edit protocols mpls label-switched-path lsp-name]
Description
Enable the ingress label edge routers (LER) to re-use the LSP-ID when performing bandwidth change on an intra-domain LSP. the LSP-ID re-use mechanism described in this document will not be applicable for inter-domain LSPs
commit fails if you have configured either
of the following:
-
no-cspf at the
[edit protocols mpls]hierarchy. -
no-cspf at the
[edit protocols mpls label-switched-path (Protocols MPLS) lsp-name]hierarchy. -
p2mp (Protocols MPLS)is configured under the same[edit protocols mpls label-switched-path (Protocols MPLS) lsp-name]hierarchy. -
lsp-external-controller at the
[edit protocols mpls]hierarchy.
Default
in-place-lsp-bandwidth-update is disabled.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 20.4R1.