mac-learn-enable
Syntax
mac-learn-enable;
Hierarchy Level
[edit interfaces interface-name gigether-options ethernet-switch-profile] [edit interfaces aex aggregated-ether-options ethernet-switch-profile]
Description
For Gigabit Ethernet IQ and Gigabit Ethernet PICs with SFPs (except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port on the M7i router), for Gigabit Ethernet DPCs on MX Series routers, for 100-Gigabit Ethernet Type 5 PIC with CFP, and for MPC3E, MPC4E, MPC5E, MPC5EQ, and MPC6E MPCs, configure dynamic learning of the source and destination MAC addresses. By default, the interface is not allowed to dynamically learn source and destination MAC addresses.
To disable dynamic learning of the source and destination MAC
addresses after it has been configured, you must delete mac-learn-enable from the configuration.
MPCs support MAC address accounting for an individual interface or an aggregated Ethernet interface member link only after the interface has received traffic from the MAC source. If traffic is only exiting an interface, the MAC address is not learned and MAC address accounting does not occur.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.
Support for statement under the [edit interfaces aex aggregated-ether-options ethernet-switch-profile] hierarchy introduced in Junos OS Release 15.1.