Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Ethernet Interfaces Overview

Ethernet was developed in the early 1970s at the Xerox Palo Alto Research Center (PARC) as a data-link control layer protocol for interconnecting computers. It was first widely used at 10 megabits per second (Mbps) over coaxial cables and later over unshielded twisted pairs using 10Base-T. More recently, 100Base-TX (Fast Ethernet, 100 Mbps), Gigabit Ethernet (1 gigabit per second [Gbps]), 10-Gigabit Ethernet (10 Gbps), and 100-Gigabit Ethernet (100 Gbps) have become available.

Juniper Networks routers support the following types of Ethernet interfaces:

  • Fast Ethernet

  • Tri-Rate Ethernet copper

  • Gigabit Ethernet

  • Gigabit Ethernet intelligent queuing (IQ)

  • Gigabit Ethernet IQ2 and IQ2-E

  • 10-Gigabit Ethernet IQ2 and IQ2-E

  • 10-Gigabit Ethernet

  • 10-Gigabit Ethernet dense wavelength-division multiplexing (DWDM)

  • 100-Gigabit Ethernet

  • Management Ethernet interface, which is an out-of-band management interface within the router

  • Internal Ethernet interface, which connects the Routing Engine to the packet forwarding components

  • Aggregated Ethernet interface, a logical linkage of Fast Ethernet, Gigabit Ethernet, or 10-Gigabit Ethernet physical connections