Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

xe (Port)

Syntax

Hierarchy Level

Description

(QFX3600 standalone switch only) Configure a specific port or a range of ports to operate as four 10-Gigabit Ethernet (xe) type ports.

CAUTION:

The Packet Forwarding Engine on the switch is restarted when you commit the port type configuration changes. As a result, you might experience packet loss on the switch.

Note:

Port Q0 supports only three (not the typical four)10-Gigabit Ethernet ports. Therefore, you can configure up to 63 (not 64) 10-Gigabit Ethernet ports on ports Q0 through Q15.

Options

port-number

Port number on which you want to configure the port type. Valid values are 0 through 15.

port-range-low

Lowest-numbered port in the range of ports. The lowest possible value is 0.

port-range-high

Highest-numbered port in the range of ports. The highest possible value is 15.

Required Privilege Level

routing—To view this statement in the configuration.routing-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 12.2X50-D20.